Experimental investigation on n–octadecane/polystyrene/expanded graphite composites as form–stable thermal energy storage materials. (15th August 2018) - Zhang, Zhishan
Abstract: In this work, polystyrene–based form–stable composite phase change materials (CPCMs) were fabricated by a solution and reflux method. In the composites, the n–octadecane (ODE) was used as thermal energy storage material, the polystyrene (PS) acted as the supporting material, and expanded graphite (EG) was employed as thermal conductive filler to improve the thermal conductivity of the composites. The toluene was adopted as solvent. Both polystyrene and n–octadecane smoothly dissolve in toluene. EG was also easily dispersed into the matrix. CPCMs were obtained after distillation of the toluene. The differential scanning calorimeter (DSC) and a thermogravimetry analyzer (TGA) were adopted to assess the thermal properties and thermal stability of the CPCMs, respectively. Fourier transformation infrared (FT–IR) spectroscope and scanning electronic microscope (SEM) were utilized to determine the chemical structure and microstructure of the ODE/PS/EG composites. The thermal conductivity of the CPCM with 5 wt% content of EG can reach up to 1.01 W/m·K, which is nearly 7 times higher than that of the CPCM without the EG. The latent heat value of CPCM with the highest ODE content (48.5 wt%) is 98.05 J/g, the melting temperature is 27.5 °C, which is close to room temperature. Therefore, the form–stable CPCMs are promising thermal energy storage materials in solar thermal energy storage systems, such as solar heating system in buildings. Highlights: Form–stable ODE/PS/EG composites were fabricated by solution and reflux method. Microstructure and chemical structure of the composites were analyzed. The composites with 48.3 wt% ODE have a high latent heat of 98.05 J/g. Thermal conductivity of the ODE/PS composites can be improved to 1.012 W/m K by EG.