An automated inverse method to calibrate thermal finite element models for numerical welding applications. (November 2019)

• Record Type: Journal Article
• Authors: Walker, T.R.; Bennett, C.J.
• Is Part Of: Journal of manufacturing processes. Volume 47(2019)
• Page Start: 263
• Page End: 283
• Publication Date: 2019-11
• Subjects: Welding -- Finite element -- Heat source model -- Calibration -- Automated analysis -- Optimisation; Production management -- Data processing -- Periodicals; Manufacturing processes -- Periodicals; Procestechnologie; Productietechniek; Production -- Gestion -- Informatique -- Périodiques; Fabrication -- Périodiques; Manufacturing processes; Production management -- Data processing; Periodicals; 670.5
• DOI: 10.1016/j.jmapro.2019.09.021
• Languages: English
• ISSNs: 1526-6125

Abstract

Graphical abstract: Highlights: An automated calibration process, which determines the optimum element size for the FE mesh has been developed. The parameters of the heat source model are refined using an inverse approach. The proposed calibration procedure allows automation of an important step in the thermal modelling of welding process. For a hybrid heat source model (Gaussian disc and Cylindrical), a Multi-Objective Optimisation (MOO) was required. Abstract: Numerical modelling of welding processes is often completed using a sequentially coupled thermo-mechanical Finite Element (FE) analysis to predict both the thermal and mechanical effects induced by the process. The accuracy of the predicted residual stresses and distortions are highly dependent upon an accurate representation of the thermal field. Utilising this approach, the physics of the melt pool are replaced with a heat source model which represents the heat flux distribution of the process. Many heat source models exist; however, the parameters which define the geometrical distribution have to be calibrated using experimental data. Currently the most common method involves trial and error, until the predicted thermal history and melt pool geometry accurately represent the experimental data. Although this is a simple approach, it is often time consuming and inherently inaccurate. Therefore, this study presents an automated calibration process, which determines the optimum element size for the FE mesh and then refines the parameters of the heat source model using an inverse approach. The proposed procedure was implemented for laser beam welding, operating in both the conductive and keyhole regimes. To ensure that both the thermal history data and melt pool geometry were predicted with accuracy, a multi-objective optimisation was required. The proposed methodology was experimentally validated through welding nine IN718 samples using a Nd:YAG laser heat source. A good correlation between the experimental and numerical data sets were apparent. With regards to the predicted melt pool geometry, the maximum error for the width, depth and area of the melt pool was 8.4%, 4.0% and 11.0% respectively and the minimum error was 1.5%, 0.3% and 0.3% respectively. For the temperature profiles, the maximum and minimum errors for the peak temperature were 8.6% and 1.2%. Overall, the proposed calibration procedure allows automation of an important step in the thermal modelling of welding process, allowing a more efficient industrial use of the sequentially coupled FE approach.