Novel fluorescent sensor using molecularly imprinted silica microsphere‐coated CdSe@CdS quantum dots and its application in the detection of 2, 4, 6‐trichlorophenol from environmental water samples. (12th June 2019)

• Record Type: Journal Article
• Authors: Liu, Yang; Chen, Piaopiao; Zheng, Shan; Xing, Yichen; Huang, Chaobiao
• Is Part Of: Luminescence. Volume 34:Number 7(2019)
• Page Start: 680
• Page End: 688
• Publication Date: 2019-06-12
• Subjects: 2, 4, 6‐trichlorophenol -- fluorescence -- molecularly imprinted polymers -- quantum dots; Luminescence -- Periodicals; Bioluminescence -- Periodicals; Chemiluminescence -- Periodicals; Luminescence -- Periodicals; 535.35
• DOI: 10.1002/bio.3653
• Languages: English
• ISSNs: 1522-7235

Abstract

Abstract: In this study, a high fluorescence sensitivity and selectivity, molecularly imprinted nanofluorescent polymer sensor (MIP@SiO2 @QDs) was prepared using a reverse microemulsion method. 2, 4, 6‐Trichlorophenol (2, 4, 6‐TCP) was detected using fluorescence quenching. Tetraethyl orthosilicate (TEOS), quantum dots (QDs) and 3‐aminopropyltriethoxysilane (APTS) were used as cross‐linker, signal sources and functional monomer respectively. The sensor (MIP@SiO2 @QDs) and the non‐imprinted polymer sensor (NIP@SiO2 @QDs) were characterized using infra‐red (IR) analysis, X‐ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The selectivity of MIP@SiO2 @QDs was examined by comparing 2, 4, 6‐TCP with other similar functional substances including 2, 4‐dichlorophenol (2, 4‐DCP), 2, 6‐dichlorophenol (2, 6‐DCP) and 4‐chlorophenol (4‐CP). Results showed that MIP@SiO2 @QDs had better selectivity for 2, 4, 6‐TCP than the other compounds. Fluorescence quenching efficiency displayed a good linear response at the 2, 4, 6‐TCP concentration range 5–1000 μmol/L. The limit of detection (LOD) was 0.9 μmol/L (3σ, n = 9). This method was equally applicable for testing actual samples with a recovery rate of 98.0–105.8%. The sensor had advantages of simple pretreatment, good sensitivity and selectivity, and wide linear range and could be applied for the rapid detection of 2, 4, 6‐TCP in actual samples.