Stress distribution around a broken carbon fibre and how it is affected by carbon nanotubes in the interface region. Issue 6 (3rd June 2019)

• Record Type: Journal Article
• Authors: Shishkina, Oksana; Romanov, Valentin; Abdin, Yasmine; Lomov, Stepan V.; Gorbatikh, Larissa
• Is Part Of: Composite interfaces. Volume 26:Issue 6(2019)
• Page Start: 507
• Page End: 524
• Publication Date: 2019-06-03
• Subjects: Composites -- fibre failure -- stress concentration -- longitudinal loading -- finite element modelling -- grown carbon nanotubes (CNTs); Composite materials -- Periodicals; 620.11805
• DOI: 10.1080/09276440.2018.1511108
• Languages: English
• ISSNs: 0927-6440

Abstract

ABSTRACT: We performed a numerical study to evaluate the influence of carbon nanotubes (CNTs) on the stress build-up in and around a broken fibre in a single carbon fibre/epoxy composite loaded longitudinally. The CNTs were located in the interface region and mimicked one of the two deposition techniques: 1) direct growth on the fibre or 2) dispersion in the fibre sizing. These techniques are known to produce different alignment, orientation and concentration of CNTs in a composite, which affect stress redistribution upon the fibre failure. The study was performed using a two-scale finite element model based on the embedded regions technique. The most significant effect on the stress build-up was found for CNTs aligned in the fibre direction. In this case, the crack opening displacement and the ineffective length were reduced by 15% and 28%, respectively, thus making the stress recovery in the broken fibre faster. In addition, the shear stress at the fibre-matrix interface decreased by a factor of two. These results indicate that hybridization of microscopic fibres with nanotubes aligned in the fibre direction is a promising strategy to influence the process of fibre fragmentation in a composite. Graphical Abstract: