Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis. (15th September 2017)

• Record Type: Journal Article
• Authors: Zhang, Ruiliang; Gu, Fengshou; Mansaf, Haram; Wang, Tie; Ball, Andrew D.
• Is Part Of: Mechanical systems and signal processing. Volume 94(2017)
• Page Start: 202
• Page End: 213
• Publication Date: 2017-09-15
• Subjects: Motor current signal analysis -- Modulation signal bispectrum -- Gear wear -- Gearbox monitoring; Structural dynamics -- Periodicals; Vibration -- Periodicals; Constructions -- Dynamique -- Périodiques; Vibration -- Périodiques; Structural dynamics; Vibration; Periodicals; 621
• DOI: 10.1016/j.ymssp.2017.02.037
• Languages: English
• ISSNs: 0888-3270

Abstract

Highlights: Gearbox wear is monitored through motor current signature analysis (MCSA). Μodulation signal bispectrum (MSB) extracts weak modulations in motor current signals. Τhe MSB peaks from the slice at supply frequency is used to characterize the dynamics of rotations. MSB peak exhibit a steady increasing trend reflecting the gear wear progression. Results confirm the accuracy and reliability of MSCA-MSB monitoring approach. Abstract: Gears are important mechanical components for power transmissions. Tooth wear is one of the most common failure modes, which can present throughout a gear's lifetime. It is significant to accurately monitor gear wear progression in order to take timely predictive maintenances. Motor current signature analysis (MCSA) is an effective and non-intrusive approach which is able to monitor faults from both electrical and mechanical systems. However, little research has been reported in monitoring the gear wear and estimating its severity based on MCSA. This paper presents a novel gear wear monitoring method through a modulation signal bispectrum based motor current signal analysis (MSB-MCSA). For a steady gear transmission, it is inevitable to exist load and speed oscillations due to various errors including wears. These oscillations can induce small modulations in the current signals of the driving motor. MSB is particularly effective in characterising such small modulation signals. Based on these understandings, the monitoring process was implemented based on the current signals from a run-to-failure test of an industrial two stages helical gearbox under a moderate accelerated fatigue process. At the initial operation of the test, MSB analysis results showed that the peak values at the bifrequencies of gear rotations and the power supply can be effective monitoring features for identifying faulty gears and wear severity as they exhibit agreeable changes with gear loads. A monotonically increasing trend established by these features allows a clear indication of the gear wear progression. The dismantle inspection at 477 h of operation, made when one of the monitored features is about 123% higher than its baseline, has found that there are severe scuffing wear marks on a number of tooth surfaces on the driving gear, showing that the gear endures a gradual wear process during its long test operation. Therefore, it is affirmed that the MSB-MSCA approach proposed is reliable and accurate for monitoring gear wear deterioration.