Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer. (5th February 2019)

• Record Type: Journal Article
• Authors: Pelanconi, M.; Barbato, M.; Zavattoni, S.; Vignoles, G.L.; Ortona, A.
• Is Part Of: Materials & design. Volume 163(2019)
• Publication Date: 2019-02-05
• Subjects: Porous ceramic -- Alumina -- Heat exchange -- Additive manufacturing; Materials -- Periodicals; Engineering design -- Periodicals; Matériaux -- Périodiques; Conception technique -- Périodiques; Electronic journals; 620.11
• DOI: 10.1016/j.matdes.2018.107539
• Languages: English
• ISSNs: 0264-1275

Abstract

Abstract: The present study is focused on the application of a ceramic tubular high temperature heat exchanger with engineered cellular architectures. Thermal design and optimization to maximise the radiative heat transfer has been investigated both experimentally and computationally. Numerical models were designed involving various arrangements of cells and their different sizes (while the total heat transfer area remains constant). They were 3D-printed by Stereolithography (SLA) and subsequently sintered. Heat transfer tests were performed both with a high temperature pressure drop test and by CFD simulations on 2D and 3D models. The computational results agree with the experimental data. We found that radial heat transfer in a tube increases by 160% to 280%, if a ceramic lattice is inserted, in respect of an empty tube. Moreover, the arrangement of cells and their size significantly influences the radiative heat transfer showing (for a given array) its top performances above 773 K. Geometries with large cells outside and small cells inside in the radial direction allow radiation to penetrate better through the core of the porous body. With this engineered ceramic lattices it is possible to reduce the tube length by one third to obtain more compact heat exchangers than an empty tubular solution. Graphical abstract: Unlabelled Image Highlights: An alumina tubular heat exchanger (dia. 20 mm, length 500 mm) with cellular architectures was realized and tested in flowing air at 773, 873 and 973 K Periodic ceramic architectures with varying cell size distribution (2–4 mm) were designed and produced by Additive Manufacturing. The lattice improves the heat transfer of 160÷280% in respect of the empty tube The RDCS lattice yields the highest air outlet temperature (957 K) in respect of the empty tube (466 K) The RICS lattice shows the worst performance (841 K), the S geometry shows an intermediate behavior (925 K)