Estimation of the temperature field in laser-induced hyperthermia experiments with a phantom. (31st December 2018)

• Record Type: Journal Article
• Authors: Lamien, Bernard; Rangel Barreto Orlande, Helcio; Antonio Bermeo Varón, Leonardo; Leite Queiroga Basto, Rodrigo; Enrique Eliçabe, Guillermo; Silva dos Santos, Dilson; Machado Cotta, Renato
• Is Part Of: International journal of hyperthermia. Volume 35:Number 1(2018)
• Page Start: 279
• Page End: 290
• Publication Date: 2018-12-31
• Subjects: State estimation -- particle filter -- Monte Carlo -- nanoparticles; Thermotherapy -- Periodicals; 615.832
• DOI: 10.1080/02656736.2018.1496283
• Languages: English
• ISSNs: 0265-6736

Abstract

Abstract: Background : One of the challenges faced during the hyperthermia treatment of cancer is to monitor the temperature distribution in the region of interest. The main objective of this work was to accurately estimate the transient temperature distribution in the heated region, by using a stochastic heat transfer model and temperature measurements. Methods : Experiments involved the laser heating of a cylindrical phantom, partially loaded with iron oxide nanoparticles. The nanoparticles were manufactured and characterized in this work. The solution of the state estimation problem was obtained with an algorithm of the Particle Filter method, which allowed for simultaneous estimation of state variables and model parameters. Measurements of one single sensor were used for the estimation procedure, which is highly desirable for practical applications in order to avoid patient discomfort. Results : Despite the large uncertainties assumed for the model parameters and for the coupled radiation–conduction model, discrepancies between estimated temperatures and internal measurements were smaller than 0.7 °C. In addition, the estimated fluence rate distribution was physically meaningful. Maximum discrepancies between the prior means and the estimated means were of 2% for thermal conductivity and heat transfer coefficient, 4% for the volumetric heat capacity and 3% for the irradiance. Conclusions : This article demonstrated that the Particle Filter method can be used to accurately predict the temperatures in regions where measurements are not available. The present technique has potential applications in hyperthermia treatments as an observer for active control strategies, as well as to plan personalized heating protocols.