Effect of molecular structures on static and dynamic compression properties of clay and amphiphilic clay/carbon nanofibers used as fillers in UHMWPE/composites for high‐energy‐impact loading. Issue 8 (22nd October 2018) - Dias, R. R.
ABSTRACT: Three different ultrahigh‐molecular‐weight polyethylene (UHMWPE)–clay nanocomposites (Muscovite, Cloisite 30B and amphiphilic clay/carbon nanofibers) were investigated with the nanocomposite nanomorphology studied before and after dynamic mechanical compressive tests at high strain rates. Their material structure and thermal properties were investigated using techniques such as step‐scan differential scanning calorimetry, split Hopkinson pressure bar, synchrotron small angle X‐ray scattering (SAXS), and dynamic mechanical analysis. Results were associated with morphological changes observed after deformation. chemical vapor deposition (CVD)‐modified nanocomposite, due to the molecular bonding and the extra functional groups, is designed with crystalline structures with fewer defects and higher stability. The increase in particulate/polymer interactions observed for the CVD‐modified material decreased the elongation in the quasi‐static test. However, the dynamic mechanical behavior contradicted the quasi‐static behavior because at very high strain rates there was not sufficient time for the interlamellar and intralamellar defect facilitated plastic flow and the material transitioned through the glassy state. The SAXS results show that deformation strongly induced changes in the UHMWPE and UHMWPE–clay nanocomposite morphology. SAXS indicates that CVD‐modified samples became more compact and dense, thus corroborating the formation of additional secondary bonds between structures and/or the carbon nanofibers alignment. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2019, 136, 47094. Abstract : Dynamic compressive behaviour at high strain rate using split Hopkinson pressure bar