Performance evaluation of cryogenically treated wires during wire electric discharge machining of AISI D3 die tool steel under different cutting environments. Issue 6 (4th November 2019)

• Record Type: Journal Article
• Authors: Sharma, Husandeep; Goyal, Khushdeep; Kumar, Sunil
• Is Part Of: Multidiscipline modeling in materials and structures. Volume 15:Issue 6(2019)
• Page Start: 1318
• Page End: 1336
• Publication Date: 2019-11-04
• Subjects: Parameters -- Surface finish -- Cryogenics -- Material removal rate -- Tool steel; Materials -- Mathematical models -- Periodicals; Engineering -- Mathematical models -- Periodicals; 620.11015118
• DOI: 10.1108/MMMS-04-2019-0078
• Languages: English
• ISSNs: 1573-6105

Abstract

Abstract : Purpose: Tool steel (AISI D3) is a preferred material for industrial usage. Some of the typical applications of D3 tool steel are blanking and forming dies, forming rolls, press tools and punches bushes. It is used under conditions where high resistance to wear or to abrasion is required and also for resistance to heavy pressure rather than to sudden shock is desirable. It is a high carbon and high chromium steel. Therefore, wire electric discharge machining (WEDM) is used to machine this tool steel. The paper aims to discuss these issues. Design/methodology/approach: The present experimental investigation evaluates the influence of cryogenically treated wires on material removal rate (MRR) and surface roughness (SR) for machining of AISI D3 steel using the WEDM process. Two important process responses MRR and SR have been studied as a function of four different control parameters, namely pulse width, time between two pulses, wire mechanical tension and wire feed rate. Findings: It was found that pulse width was the most significant parameter which affects the MRR and SR. Better surface finish was obtained with cryogenically treated zinc coated wire than brass wire. Originality/value: The review of the literature indicates that there is limited published work on the effect of machining parameters in WEDM in cryogenic treated wires. Therefore, in this research work, it was decided to evaluate the effect of cryogenically treated wires on WEDM.