Three dimensional discrete element simulation of cylindrical cavity expansion from zero initial radius in sand. (January 2020)

• Record Type: Journal Article
• Authors: Dong, Yang; Fatahi, Behzad; Khabbaz, Hadi
• Is Part Of: Computers and geotechnics. Volume 117(2020)
• Publication Date: 2020-01
• Subjects: Cavity expansion -- Initial cavity radius -- Discrete element numerical modelling; Engineering geology -- Data processing -- Periodicals; Soil mechanics -- Data processing -- Periodicals; Rock mechanics -- Data processing -- Periodicals; 624.1510285
• DOI: 10.1016/j.compgeo.2019.103230
• Languages: English
• ISSNs: 0266-352X

Abstract

Abstract: This study seeks to assess the influence of choice of initial cavity radius on the soil response during cavity expansion in sandy soil adopting three-dimensional discrete element simulations and obtaining the size of the influence zone when the expansion starts from zero initial radius. Sandy soil is modelled adopting rolling resistance contact model to capture the effects of particle interlocking, and the microscopic parameters are calibrated utilising linear model deformability method for both loose and dense sands against experimental results. Four cylindrical cavity expansions that commenced from different initial radii are simulated in dense and loose sand specimens. The large-scale three-dimensional model is proposed with more than 500, 000 particles, enabling precise volumetric dilation and contraction predictions using strain rate tensors. During the cavity expansion process, cavity pressure is constantly recorded by appropriate subroutines, while the stress-strain and void ratio variations are continuously monitored using an array of prediction spheres situated close to the internal cavities. The results confirm that the initial cavity radius chosen has conspicuous effects on the cavity pressure, the stress path, the volumetric strain and the deviatoric stress, especially at the initial stage of expansion; however, these effects become less pronounced and are ultimately minor as the cavity reaches full expansion. The results confirmed that given the same expansion volume, the pressure required to create a cavity is significantly larger than expanding an existing cavity in the same soil medium, whereas the pressure needed to maintain an already expanded cavity is not sensitive to the choice of initial cavity radius. The results obtained were further validated adopting the variations of stress path, deviatoric stress and volumetric strain in the vicinity of the cavity wall. The findings from this study may provide practicing engineers with confidence in determining the appropriate size of the pilot hole in driven pile installation and horizontal directional drilling for trenchless piping in sandy soil. In addition, the lateral soil displacement induced by cavity expansion is also examined in this study. It is concluded that the radial displacement due to cavity expansion in loose sand can reach 25 a f ( a f representing the final cavity radius), while a larger influence zone must be considered by practicing engineers when dealing with dense sand.