Bismuth doped TiO2 as an excellent photocathode catalyst to enhance the performance of microbial fuel cell. (12th April 2018) - Bhowmick, G.D.
Abstract: Bismuth impregnation on pure TiO2 (BiTiO2 ) was carried out and tested in microbial fuel cell (MFC) as photocathode catalyst. UV–Visible spectral observation confirmed higher catalytic activity of BiTiO2 under visible light irradiation with reduced band gap of 2.80 eV as compared to pure TiO2 (3.26 eV). Electrochemical impedance spectroscopy also showed two times higher exchange current density with lower charge transfer resistance for BiTiO2 (1.90 Ω) than pure TiO2 (3.95 Ω), thus confirming it as superior oxygen reduction reaction catalyst. MFC operated with BiTiO2 could generate a maximum power density of 224 mW m −2, which was higher than MFC with Pt as cathode catalyst (194 mW m −2 ) and much higher than MFCs with TiO2 catalyzed cathode (68 mW m −2 ) and without any cathode catalyst (60 mW m −2 ). The results thus promote Bi doped TiO2 as a superior low-cost alternative to the costly Pt catalyst to take this MFC technology forward for field application. Highlights: Bi doped TiO2 (BiTiO2 ) was synthesized by incipient wet impregnation method. Synthesized BiTiO2 tested in microbial fuel cell as photocathode catalyst. Higher photocatalytic activity of BiTiO2 was observed compared to pure TiO2. 3.7 times higher power density in MFC with BiTiO2 catalyst than control MFC. BiTiO2 as a low-cost alternative to the costly Platinum to produce same power.