Computational fluid dynamic studies of mixers for highly viscous shear thinning fluids and PIV validation. (6th April 2018)

• Record Type: Journal Article
• Authors: Cortada-Garcia, Marti; Weheliye, Weheliye Hashi; Dore, Valentina; Mazzei, Luca; Angeli, Panagiota
• Is Part Of: Chemical engineering science. Volume 179(2018)
• Page Start: 133
• Page End: 149
• Publication Date: 2018-04-06
• Subjects: PIV -- CFD -- Mixing tanks -- Shear thinning fluids; Chemical engineering -- Periodicals; Génie chimique -- Périodiques; Chemical engineering; Periodicals; Electronic journals; 660
• DOI: 10.1016/j.ces.2018.01.010
• Languages: English
• ISSNs: 0009-2509

Abstract

Highlights: PIV mixing studies of highly viscous shear thinning fluids in stirred tanks. Computational fluid dynamic simulations of agitation of shear thinning fluids. Characteristics of flow using a complex impeller design. Study of local effect of holes in impeller blades. Abstract: Agitation of highly viscous shear thinning fluids is normally conducted with complex impeller designs. Often, impellers almost as large as the tanks containing them and impeller blades equipped with holes are adopted in industry. In this work, we studied experimentally the main features of the flow generated by this type of impellers for a mixture of glycerol with a carbomeric gel by means of particle image velocimetry. The experiments were conducted at temperatures ranging from 40 to 60 °C and impeller speeds ranging from 40 to 140 rpm. In all cases, the flow regime was laminar or in the transition region. We also used computational fluid dynamics simulations to describe the behaviour of the mixer, validating the results experimentally with good agreement. We used the numerical results to obtain information on the performance of the mixer, determining the locations and size of vigorous agitation zones and the local effect of the holes present on the impeller blades. The power curves of the mixer were obtained, and the mixer efficiency in terms of power consumption was found to be similar to other impellers used to mix highly viscous non-Newtonian fluids.