Influence of bone quality on the mechanical interaction between implant and bone: A finite element analysis. (September 2019)

• Record Type: Journal Article
• Authors: Azcarate-Velázquez, Francisco; Castillo-Oyagüe, Raquel; Oliveros-López, Luis-Guillermo; Torres-Lagares, Daniel; Martínez-González, Álvaro-José; Pérez-Velasco, Andrea; Lynch, Christopher D.; Gutiérrez-Pérez, José-Luis; Serrera-Figallo, María-Ángeles
• Is Part Of: Journal of dentistry. Volume 88(2019:Sep.)
• Publication Date: 2019-09
• Subjects: Dental implants -- Bone quality -- Finite element analysis; Dentistry -- Periodicals; Dentistry -- Periodicals; Dentisterie -- Périodiques; Electronic journals; 617.6005
• DOI: 10.1016/j.jdent.2019.06.008
• Languages: English
• ISSNs: 0300-5712

Abstract

Abstract: Objectives: To evaluate the influence of bone type in terms of bone density and cortical bone thickness, on the stresses induced by two implants under compressive and oblique loads. Methods: A numerical simulation technique based on the finite element method was applied. Two implant types (M-12 and Astra Tech) were introduced in a model matrix whose geometry was extracted from a real CBCT radiograph of the posterior mandibular region. The Young's module and Poisson's coefficient of the bone qualities described by Misch were calculated. Loads with amplitude of 400 N were exerted in two directions: compressive and 15° oblique to 5 mm above the uppermost part of the implant. Results: The von Misses variant was analysed. Both implant types presented greater tension in the ​​cortical bone area than in the ​​trabecular bone region under compressive loading. For the oblique load condition, the stresses obtained in the cortical zone were significantly higher than those registered as a consequence of compressive loads in both implant types. Conclusions: Regardless of bone type, the M-12 implants presented lower tensions in the cortical bone than did the Astra implants. The tensions recorded for D3 and D4 bone types in the trabecular zone surrounding the M-12 implants were greater than those recorded for the Astra implants. Clinical significance: For both compressive and oblique loads, good mechanical behaviour was observed. The decrease in bone quality determines a worse stress distribution, and the cortical bone is overloaded. An efficient distribution of the forces may increase the implants' longevity.