Structural Health Monitoring system based on a concept of Lamb wave focusing by the piezoelectric array. (August 2018) - Kudela, Pawel
Highlights: A novel strategy for damage detection and localization based on Lamb wave focusing and dispersion compensation. Numerical and experimental verification of the proposed method. Comparison of the proposed method with delay-and-sum algorithm. Abstract: Piezoelectric transducer arrays are utilized in Structural Health Monitoring systems as a means for excitation and sensing of elastic waves. Anomalies of propagating waves have enabled to develop damage detection algorithms. Depending on actuation-sensing strategies these algorithms can be classified as pitch-catch and pulse-echo. Despite many signal processing methods such as delay-sum, time-reversal, probability-based diagnostic imaging, etc. the spatial damage information provided by the actuator-sensor paths to reconstruct the damage image is limited. A novel strategy based on Lamb wave focusing is proposed in order to increase damage imaging resolution. In the proposed method all actuators are used at the same time exciting specially designed waveforms so that inspect one specific point of the structure. Damage map is created by applying appropriate signal processing. It uses dispersion curve of selected Lamb wave mode for dispersion compensation. The dispersion curve is acquired by using laser scanning Doppler vibrometer. The damage indicator is calculated based on the energy of compensated signals registered by sensors. It is shown that apart from high energy level at excitation point, energy is concentrated exactly in the damaged region. An example of crack detection and visualization in an aluminum plate is shown confirming the accuracy of the proposed method. Also the proposed method is compared to well-established delay-and-sum algorithm.