In situ characterization of enhanced thermal performance by periodic nanostructures on the surface of a microchannel. (September 2018)

• Record Type: Journal Article
• Authors: Yu, Jiwon; Kang, Seok-Won; Kwon, Tae-Soon; Banerjee, Debjyoti
• Is Part Of: International journal of heat and mass transfer. Volume 124(2018)
• Page Start: 414
• Page End: 422
• Publication Date: 2018-09
• Subjects: Convective heat transfer -- Nanofins -- SFIL (step and flash imprint lithography) -- Surface modification -- TFT (thin-film thermocouples); Heat -- Transmission -- Periodicals; Mass transfer -- Periodicals; Chaleur -- Transmission -- Périodiques; Transfert de masse -- Périodiques; Electronic journals; 621.4022
• DOI: 10.1016/j.ijheatmasstransfer.2018.03.074
• Languages: English
• ISSNs: 0017-9310

Abstract

Highlights: An in situ analysis was conducted to investigate the effects of nanoscale surface modifications. A numerical analysis was performed for periodic nanostructures on the microchannel surface. The enhancement by theoretical analysis were in good agreement with experimental results. An analysis of the pressure drop induced by the existence of nanostructures was performed. A theoretical correlation of the Nusselt number for a flow across nanofins was derived. Abstract: In situ formation of nanofins (i.e. isolated and dispersed precipitation of nanoparticles) on flow conduits induces changes to the surface morphology for heat exchange, increasing effective surface area and enhancing their cooling performance. Furthermore, the existence of these nanostructures has a significant influence on heat transfer, as opposed to the thermo-physical properties (e.g. thermal conductivity) of cooling fluids enhanced by addition of nanoparticles. This study conducted an in situ analysis exploring the effects of nanoscale surface modifications on forced convective heat transfer and thermal performance. A numerical heat transfer analysis, based on the conductive/convective heat transfer between a fin base and deionized water (DIW), was performed with the assumption that periodic nanostructures existed on the heated microchannel surface. Predictions of enhanced thermal performance (between 37% and 143%) from the resultant increase in the effective heat transfer area were validated for flows over these nanostructures (artificial nanofins) fabricated by SFIL (step and flash imprint lithography) inside a microchannel. Polydimethylsiloxane microchannels are bonded to a silicon wafer containing thin-film thermocouple arrays deposited onto artificial nanofins, which had been fabricated a priori for the in situ characterization of thermal performance. It was found that the convective heat transfer Nusselt number (Nu) increased from 61% to 110%. Additionally, a theoretical analysis of the pressure drop was also successfully achieved for a comprehensive understanding of the heat transfer characteristics at the fluid-wall interface of a microchannel.