Study on the characteristics of evaporation–atomization–combustion of biodiesel. Issue 5 (October 2019)

• Record Type: Journal Article
• Authors: Shen, Yicheng; Li, Fashe; Liu, Zuowen; Wang, Huage; Shen, Jiaxu
• Is Part Of: Journal of the Energy Institute. Volume 92:Issue 5(2019)
• Page Start: 1458
• Page End: 1467
• Publication Date: 2019-10
• Subjects: Laminar premixed -- Combustion flame -- OH-PLIF -- [CO]/[CO2] -- NO; Power (Mechanics) -- Periodicals; Power resources -- Periodicals; Fuel -- Periodicals; 621.04205
• DOI: 10.1016/j.joei.2018.08.005
• Languages: English
• ISSNs: 1743-9671

Abstract

Abstract: A great deal of research is being carried out on renewable diesel fuels. The number of raw materials (especially waste, animal, and vegetable oils), production technologies, and additives of biodiesel is increasing. In our work, a evaporation–atomization–combustion system consisting of a biomass liquid fuel was designed to produce a laminar premixed flame for studying the combustion–emission characteristics of biodiesel. The combustion characteristics of biodiesel including flame height, flame front area, flame speed, and OH total signal intensity were studied by planar laser-induced fluorescence of OH (OH-PLIF). The emission characteristics of biodiesel (CO, CO2, and NO) were studied with a flue gas analyzer. The experimental results showed that the flame height, flame front area, flame speed, and the OH total signal intensity changed with the equivalence ratio (Φ). The relationship between the OH radical intensity and the emission of CO/CO2 was obtained from the OH-PLIF average signal intensity. The [CO]/[CO2 ] ratio decreased with the OH-PLIF average signal intensity. Finally, we obtained the relationship between the OH-PLIF average signal intensity and the NO emissions. Highlights: A new burner was designed and set to produce biodiesel laminar premixed flame for studying. The combustion characteristics of biodiesel were studied by OH-PLIF technique. The relationship between OH radical intensity and the emission of CO and NO are set up.