A study on the effect of compositing silver oxide nanoparticles by carbon on the ‎electrochemical behavior and electronic properties of zinc‐silver oxide batteries ‎. Issue 6 (17th June 2018)

• Record Type: Journal Article
• Authors: Sabzi, Masoud; Mersagh Dezfuli, Saeid
• Is Part Of: International journal of applied ceramic technology. Volume 15:Issue 6(2018)
• Page Start: 1446
• Page End: 1458
• Publication Date: 2018-06-17
• Subjects: compositing silver oxide nanoparticles -- electrochemical behavior ‎ -- energy efficiency -- silver oxide electrode -- zinc‐silver oxide batteries; Ceramics -- Periodicals; Ceramics -- Technological innovations -- Periodicals; 620.1405
• DOI: 10.1111/ijac.13047
• Languages: English
• ISSNs: 1546-542X

Abstract

Abstract: In this study, the effect of compositing silver oxide nanoparticles by carbon on the electrochemical behavior and electronic properties of zinc‐silver oxide batteries have been investigated. For this purpose, firstly four silver oxide electrodes containing 5, 10, 15, and 20 wt% carbon powder were produced by powder metallurgy method. For the next step, all four silver oxide electrodes were sintered at 500°C for 10 minutes. Afterward and in order to investigate the microstructure, phase and elemental analysis of the electrodes were carried out using Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), X‐ray Diffraction (XRD), and Energy Dispersive Spectroscopy (EDS), respectively. Moreover, in order to investigate the effect of compositing silver oxide nanoparticles by carbon on the electrochemical behavior and electronic properties of zinc‐silver oxide, electrochemical tests (potentiodynamic polarization and electrochemical impedance spectroscopy) and electric discharge test in 1.4 wt%KOH electrolyte were carried out respectively. The microstructural observations revealed that increasing carbon content in the silver oxide electrodes results in increasing the apparent porosities in these electrodes. Investigating the phase and elemental analysis results showed that by increasing the content of carbon in the silver oxide electrode, the amount of Ag2 O and AgO phases in this electrode reduces and also the extent of pure silver formation increases. Investigations on the results of electrochemical tests showed that increasing carbon content results in the reduction of corrosion resistance in silver oxide electrodes. Moreover, the results of electric discharge test revealed that the silver oxide electrode containing 10wt% carbon yields the highest energy efficiency in the zinc‐silver oxide batteries.