Adaptation of a clinical fixation device for biomechanical testing of the lumbar spine. (1st March 2018)

• Record Type: Journal Article
• Authors: Bell, Kevin M.; Oh, Adrianna; Cook, Harold A.; Yan, Yiguo; Lee, Joon Y.
• Is Part Of: Journal of biomechanics. Volume 69(2018)
• Page Start: 164
• Page End: 168
• Publication Date: 2018-03-01
• Subjects: Spinal biomechanics -- Lumbar spine -- Mounting fixtures -- Pedicle screws -- Robotics; Animal mechanics -- Periodicals; Biomechanics -- Periodicals; Biomechanics -- Periodicals; Mécanique animale -- Périodiques; Biomécanique -- Périodiques; Electronic journals; 571.4305
• DOI: 10.1016/j.jbiomech.2017.12.029
• Languages: English
• ISSNs: 0021-9290

Abstract

Abstract: In-vitro biomechanical testing is widely performed for characterizing the load-displacement characteristics of intact, injured, degenerated, and surgically repaired osteoligamentous spine specimens. Traditional specimen fixture devices offer an unspecified rigidity of fixation, while varying in the associated amounts and reversibility of damage to and "coverage" of a specimen – factors that can limit surgical access to structures of interest during testing as well as preclude the possibility of testing certain segments of a specimen. Therefore, the objective of this study was to develop a specimen fixture system for spine biomechanical testing that uses components of clinically available spinal fixation hardware and determine whether the new system provides sufficient rigidity for spine biomechanical testing. Custom testing blocks were mounted into a robotic testing system and the angular deflection of the upper fixture was measured indirectly using linear variable differential transformers. The fixture system had an overall stiffness 37.0, 16.7 and 13.3 times greater than a typical human functional spine unit for the flexion/extension, axial rotation and lateral bending directions respectively – sufficient rigidity for biomechanical testing. Fixture motion when mounted to a lumbar spine specimen revealed average motion of 0.6, 0.6, and 1.5° in each direction. This specimen fixture method causes only minimal damage to a specimen, permits testing of all levels of a specimen, and provides for surgical access during testing.