A Systematic Review on 3D-Printed Imaging and Dosimetry Phantoms in Radiation Therapy. (12th September 2019)

• Record Type: Journal Article
• Authors: Tino, Rance; Yeo, Adam; Leary, Martin; Brandt, Milan; Kron, Tomas
• Is Part Of: Technology in cancer research & treatment. Volume 18(2019)
• Publication Date: 2019-09-12
• Subjects: additive manufacturing -- radiation -- imaging -- dosimetry -- radiopacity -- heterogeneity; Oncology -- Periodicals; Cancer -- Diagnosis -- Periodicals; Cancer -- Treatment -- Technological innovations -- Periodicals; 616.994
• DOI: 10.1177/1533033819870208
• Languages: English
• ISSNs: 1533-0346

Abstract

Introduction: Additive manufacturing or 3-dimensional printing has become a widespread technology with many applications in medicine. We have conducted a systematic review of its application in radiation oncology with a particular emphasis on the creation of phantoms for image quality assessment and radiation dosimetry. Traditionally used phantoms for quality assurance in radiotherapy are often constraint by simplified geometry and homogenous nature to perform imaging analysis or pretreatment dosimetric verification. Such phantoms are limited due to their ability in only representing the average human body, not only in proportion and radiation properties but also do not accommodate pathological features. These limiting factors restrict the patient-specific quality assurance process to verify image-guided positioning accuracy and/or dose accuracy in "water-like" condition. Methods and Results: English speaking manuscripts published since 2008 were searched in 5 databases (Google Scholar, Scopus, PubMed, IEEE Xplore, and Web of Science). A significant increase in publications over the 10 years was observed with imaging and dosimetry phantoms about the same total number (52 vs 50). Key features of additive manufacturing are the customization with creation of realistic pathology as well as the ability to vary density and as such contrast. Commonly used printing materials, such as polylactic acid, acrylonitrile butadiene styrene, high-impact polystyrene and many more, are utilized to achieve a wide range of achievable X-ray attenuation values from −1000 HU to 500 HU and higher. Not surprisingly, multimaterial printing using the polymer jetting technology is emerging as an important printing process with its ability to create heterogeneous phantoms for dosimetry in radiotherapy. Conclusion: Given the flexibility and increasing availability and low cost of additive manufacturing, it can be expected that its applications for radiation medicine will continue to increase.