Compression-Induced Solidification : A Novel Processing Technique for Precise Thermoplastic Optical Components with Negligible Internal Stresses. (27th May 2012)

• Record Type: Journal Article
• Authors: Jungmeier, Ariane; Wildner, Wolfgang; Drummer, Dietmar; Kühnert, Ines
• Other Names: Kouznetsov D. Academic Editor.; Toal V. Academic Editor.
• Is Part Of: ISRN optics. Volume 2012(2012)
• Publication Date: 2012-05-27
• Subjects: Optics -- Periodicals; Optics; Periodicals; 535
• DOI: 10.5402/2012/872816
• Languages: English
• ISSNs: 2090-7826

Abstract

Abstract : In the field of optical components, thermoplastics are replacing more and more glass mainly because of their better freedom of design and their cost-effective processing techniques. Nevertheless, especially lenses do not have an ideal design for plastic processing, because of their varying thickness from the centre to the edge. These lead to great differences in shrinkage due to the dif-ferent coefficients of thermal expansion of melt and solid state and, consequently, directly lead to warpage and residual stresses with state-of-the-art processing techniques. A promising solution is a new, innovative technique—compression-induced solidification (CIS)—where the melt is compressed at constant temperature until it solidifies. This results in isochronic solidification of the whole part even at high temperatures and reduces residual stresses and warpage due to the cooling of a body with homogenous shrinkage. In this paper, CIS integrated in the injection molding process is introduced, and the influence of process parameters on inner properties and dimensional accuracy of CIS polycarbonate parts are illustrated. Trials carried out indicate that an optimum level of compression pressure at the end of glass transition range and a sufficiently long period of holding time (hereinafter the adapting time) for reaching homogeneous temperatures within the melt until pressure is applied will generate parts with low residual stresses and high dimensional accuracy.