Load change capability of an anaerobic thermophilic trickle bed reactor for dynamic H2/CO2 biomethanation. (October 2019)

• Record Type: Journal Article
• Authors: Strübing, Dietmar; Moeller, Andreas B.; Mößnang, Bettina; Lebuhn, Michael; Drewes, Jörg E.; Koch, Konrad
• Is Part Of: Bioresource technology. Volume 289(2019)
• Publication Date: 2019-10
• Subjects: Power-to-gas -- Biomethanation -- Variable renewable energies -- Load change; Biomass -- Periodicals; Biomass energy -- Periodicals; Bioremediation -- Periodicals; Agricultural wastes -- Periodicals; Factory and trade waste -- Periodicals; Organic wastes -- Periodicals; Bioénergie -- Périodiques; Déchets agricoles -- Périodiques; Déchets industriels -- Périodiques; Déchets organiques -- Périodiques; Déchets (Combustible) -- Périodiques; 662.88
• DOI: 10.1016/j.biortech.2019.121735
• Languages: English
• ISSNs: 0960-8524

Abstract

Highlights: Dynamic ON/OFF biomethanation with rapid load changes from 0 to 62.1 m 3 H2 /m 3 /d. Five load change pattern investigated after 24 h starvation periods at 25 °C. 98% conversion re-attained 65 min after direct load increase to 62.1 m 3 H2 /m 3 /d. Grid injection quality can be controlled by gas flow measurements. Abstract: Increasing shares of energy production originating from fluctuating renewable sources require measures that are able to balance power production for a stable electricity grid. H2 /CO2 biomethanation is a suitable approach to convert fluctuating excess renewable energy into the storable substitute natural gas. This study investigated the rapid load change capability of an anaerobic thermophilic trickle bed reactor while maintaining a high methane content. The return to full load (62.1 m 3 H2 /m 3 trickle bed /d) after a 30-min operational off-cycle was possible almost immediately, while 24-h interruptions required a 60-min stepwise load increase. To accelerate this delayed microbial conversion activity, non-steady state substrate gas conversion can be controlled via substrate and product gas flow rates, allowing to reactivate the entire microbial community and produce high quality product gas. Reactor design might be further improved to avoid short-circuiting and use the entire trickle bed gas phase as high quality gas buffer during initial load increases.