Direct current microhollow cathode discharges on silicon devices operating in argon and helium. (6th February 2018)

• Record Type: Journal Article
• Authors: Michaud, R; Felix, V; Stolz, A; Aubry, O; Lefaucheux, P; Dzikowski, S; Schulz-von der Gathen, V; Overzet, L J; Dussart, R
• Is Part Of: Plasma sources science & technology. Volume 27:Number 2(2018:Apr.)
• Publication Date: 2018-02-06
• Subjects: MHCD -- microplasma -- microdischarge -- silicon -- instability; Plasma (Ionized gases) -- Periodicals; 530.44
• DOI: 10.1088/1361-6595/aaa870
• Languages: English
• ISSNs: 0963-0252

Abstract

Abstract: Microhollow cathode discharges have been produced on silicon platforms using processes usually used for MEMS fabrication. Microreactors consist of 100 or 150 μ m-diameter cavities made from Ni and SiO2 film layers deposited on a silicon substrate. They were studied in the direct current operating mode in two different geometries: planar and cavity configuration. Currents in the order of 1 mA could be injected in microdischarges operating in different gases such as argon and helium at a working pressure between 130 and 1000 mbar. When silicon was used as a cathode, the microdischarge operation was very unstable in both geometry configurations. Strong current spikes were produced and the microreactor lifetime was quite short. We evidenced the fast formation of blisters at the silicon surface which are responsible for the production of these high current pulses. EDX analysis showed that these blisters are filled with argon and indicate that an implantation mechanism is at the origin of this surface modification. Reversing the polarity of the microdischarge makes the discharge operate stably without current spikes, but the discharge appearance is quite different from the one obtained in direct polarity with the silicon cathode. By coating the silicon cathode with a 500 nm-thick nickel layer, the microdischarge becomes very stable with a much longer lifetime. No current spikes are observed and the cathode surface remains quite smooth compared to the one obtained without coating. Finally, arrays of 76 and 576 microdischarges were successfully ignited and studied in argon. At a working pressure of 130 mbar, all microdischarges are simultaneously ignited whereas they ignite one by one at higher pressure.