An experimental and numerical study of the suppression of jets, counterflow, and backflow in vortex units. Issue 8 (3rd May 2019)

• Record Type: Journal Article
• Authors: Kulkarni, Shekhar R.; Gonzalez‐Quiroga, Arturo; Nuñez, Manuel; Schuerewegen, Cedric; Perreault, Patrice; Goel, Chitrakshi; Heynderickx, Geraldine J.; Van Geem, Kevin M.; Marin, Guy B.
• Is Part Of: AIChE journal. Volume 65:Issue 8(2019)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2019-05-03
• Subjects: gas–solid vortex reactor -- gas–solid vortex units -- monolayer model -- process intensification -- vortex suppression regime; Chemical engineering -- Periodicals; Génie chimique -- Périodiques; 660.28
• DOI: 10.1002/aic.16614
• Languages: English
• ISSNs: 0001-1541

Abstract

Abstract: Vortex units are commonly considered for various single and multiphase applications due to their process intensification capabilities. The transition from gas‐only flow to gas–solid flow remains largely unexplored nonetheless. During this transition, primary flow phenomenon, jets, and secondary flow phenomena, counterflow and backflow, are substantially reduced, before a rotating solids bed is established. This transitional flow regime is referred to as the vortex suppression regime. In the present work, this flow transition is identified and validated through experimental and computational studies in two vortex units with a scale differing by a factor of 2, using spherical aluminum and alumina particles. This experimental data supports the proposed theoretical particle monolayer solids loading that allows estimation of vortex suppression regime solids capacity for any vortex unit. It is shown that the vortex suppression regime is established at a solids loading theoretically corresponding to a monolayer being formed in the unit for 1g‐Geldart D‐ and 1g‐Geldart B‐type particles. The model closely agrees with experimental vortex suppression range for both aluminum and alumina particles. The model, as well as the experimental data, shows that the flow suppression regime depends on unit dimensions, particle diameter, and particle density but is independent of gas flow rate. This combined study, based on experimental and computational data and on a theoretical model, reveals the vortex suppression to be one of the basic operational parameters to study flow in a vortex unit and that a simple monolayer model allows to estimate the needed solids loading for any vortex device to induce this flow transition.