Effect of the joint type on the bearing capacity of a multi–drum column under static load. Issue 1 (2nd January 2018)

• Record Type: Journal Article
• Authors: Buzov, A.; Radnić, J.; Grgić, N.; Baloević, G.
• Is Part Of: International journal of architectural heritage. Volume 12:Issue 1(2018)
• Page Start: 137
• Page End: 152
• Publication Date: 2018-01-02
• Subjects: bearing capacity -- deformability -- joint effect -- multi–drum column -- static load; Architecture -- Conservation and restoration -- Periodicals; Historic buildings -- Periodicals; Historic preservation -- Planning -- Periodicals; 721.0288
• DOI: 10.1080/15583058.2017.1396380
• Languages: English
• ISSNs: 1558-3058

Abstract

ABSTRACT: The results of an experimental study on the effect of the joints between the blocks on the ultimate bearing capacity of a multi-drum column loaded to centric vertical force and horizontal force in the middle of its height are shown. The column is approximately 2.5 m high, with one hinge at the top and another hinge at the bottom. Four types of joints between the blocks were considered: a dry joint (column C-DJ) and joints with stone powder (column C-SPJ), lead (column C-PBJ), and epoxy (column C-EPJ). The applied vertical and horizontal forces, horizontal displacement, vertical strains, and horizontal circumferential strains in the middle of the column height, as well as shortening of the column, were measured. Under axial compression, ratios between the ultimate load bearing capacities of tested columns were C-EPJ: C-DJ: C-SPJ: C-PBJ = 1: 0.68: 0.59: 0.51. The bearing capacity of the tested columns with regard to the horizontal force depended on the level of the applied centric compression force. Columns with soft joints (C-PBJ, C-SPJ) had the largest shortening and the largest horizontal displacements for the equal forces.