Design and numerical analysis of a large‐diameter air reverse circulation drill bit for reverse circulation down‐the‐hole air hammer drilling. Issue 3 (18th March 2019)

• Record Type: Journal Article
• Authors: Zhang, Xinxin; Luo, Yongjiang; Gan, Xin; Yin, Kun
• Is Part Of: Energy science & engineering. Volume 7:Issue 3(2019)
• Page Start: 921
• Page End: 929
• Publication Date: 2019-03-18
• Subjects: RC drill bit -- RC‐DTH air hammer -- reverse circulation -- suction ability; Energy industries -- Periodicals; Energy development -- Periodicals; Power resources -- Periodicals; 621.042
• DOI: 10.1002/ese3.321
• Languages: English
• ISSNs: 2050-0505

Abstract

Abstract: Reverse circulation down‐the‐hole (RC‐DTH) air hammer drilling is a fast and cost‐effective method for hard rock drilling. As the air RC drill bit is the heart for RC‐DTH air hammer drilling system to form the reverse circulation, a large‐diameter RC drill bit was innovatively designed and numerically optimized with respect to the suction ability. Results show that increasing the suction‐nozzle elevation angle and deflection angle can improve the drill bit suction ability. The drill bit performance reaches its optimal state when the air flow rate was about 1.205 kg/s, thereafter it exhibits a reverse variation trend with the increase in air mass flow rate. The optimum diameter of the suction nozzles is 20 mm for the drill bit studied in this work. The RC drill bit with outer diameter of 665 mm and RC‐DTH air hammer with outer diameter of 400 mm were manufactured and a field trial was conducted. Field test results show that the penetration rate using the RC‐DTH air hammer drilling method is more than twice the conventional rotary drilling method. This drilling approach poses a great potential for the large‐diameter hard rock drilling applied in the upper portions of a well bore above the potential producing reservoir formation for land oil and gas drilling, geothermal drilling and relevant field drilling operations. Abstract : Reverse circulation down‐the‐hole air hammer drilling is a fast and cost‐effective method for hard rock drilling. A large‐diameter RC drill bit was innovatively designed and numerically optimized with respect to the suction ability.