Strength design of pin-ended circular steel arches with welded hollow section accounting for web local buckling. (June 2017)

• Record Type: Journal Article
• Authors: Guo, Yan-Lin; Yuan, Xing; Bradford, Mark Andrew; Pi, Yong-Lin; Chen, Hang
• Is Part Of: Thin-walled structures. Volume 115(2017)
• Page Start: 100
• Page End: 109
• Publication Date: 2017-06
• Subjects: Steel arches -- Welded hollow section -- Global buckling -- Web local buckling -- Strength -- Design method; Thin-walled structures -- Periodicals; 690.1
• DOI: 10.1016/j.tws.2017.02.010
• Languages: English
• ISSNs: 0263-8231

Abstract

Abstract: An effective way for improving the global load-carrying capacity of a steel arch with a welded hollow section is to increase the height of its webs. However, the high and thin web may buckle locally, which will affect the global load-carrying capacity and should be taken into account in predicting the global strength of the arch. This paper presents a numerical investigation for the in-plane strength and design for pin-ended circular steel arches with a welded hollow section, focusing on the effects of web local buckling by the large deformation inelastic analysis in association with a finite shell element model. The circular steel arches subjected to a radial load uniformly distributed along the arch length, a load uniformly distributed over the full span of the arch, or/and over the half span of the arch and their various combinations are considered in the investigation of their failure modes and strengths. The initial global and local geometric imperfections as well as residual stresses are included in the finite element model. It is found that web local buckling influences the global strength of the steel arches significantly and needs to be accounted in formulate their strength design formulas. The parameters related to the web local buckling and global buckling of the arch are thoroughly explored. It is found that the stability coefficients of arches under the nominal uniform axial compression are related to the equivalent normalized web height-to-thickness ratio of the cross-section and the normalized slenderness of the arch, and accordingly the design formula of the stability coefficients is proposed by including their effects. In addition, a design formula for predicting the strengths of the arches under a load uniformly distributed over the full span is developed by introducing a corrective coefficient into the stability coefficient, and it is found that the corrective coefficient is related to the arch rise-to-span ratio and slenderness of the arch. Furthermore, a general interaction design formula is developed for predicting in-plane strength of the arches under general in-plane loading such as a load uniformly distributed over the half span of the arch and various combinations of a full span uniform load and a half span uniform load. Comparisons with the finite element results demonstrate the proposed design formulas can provide good predictions and/or lower bound predictions for the strengths of the steel arches with a welded hollow section. Highlights: Effects of web local buckling on in-plane strength for arches have been investigated. The design formula of the stability coefficients is proposed. The design formula is developed for predicting in-plane strength of the arches.