Heat transfer from glass melt to cold cap: Effect of heating rate. (25th February 2019)

• Record Type: Journal Article
• Authors: Lee, Seung Min; Hrma, Pavel; Pokorny, Richard; Traverso, Joseph J.; Klouzek, Jaroslav; Schweiger, Michael J.; Kruger, Albert A.
• Is Part Of: International journal of applied glass science. Volume 10:Number 3(2019)
• Page Start: 401
• Page End: 413
• Publication Date: 2019-02-25
• Subjects: feed‐to‐glass conversion -- foaming -- heat flux -- melting rate; Glass -- Periodicals; Glass manufacture -- Periodicals; 666.1
• DOI: 10.1111/ijag.13104
• Languages: English
• ISSNs: 2041-1286

Abstract

Abstract: Conversion of melter feed to glass occurs in the cold cap that floats on the melt pool in a nuclear waste glass melter. The conversion rate (the melting rate or the glass production rate) is controlled by the heat flux delivered to the cold cap from the molten glass. In an attempt to analyze the intricate relationship between the rate of heating, the feed foaming response, and the rate of melting, we measured the change in feed volume at different heating rates by using several melter feeds known to exhibit a wide range of melting rates under identical melter operating conditions. As expected, the maximum foam porosity increased as the heating rate increased. However, contrary to expectation, the temperature at which the foam reached maximum volume either decreased or increased with the heating rate, depending on the feed composition. A change in maximum foam temperature from the feed volume expansion test indicates a similar change of the cold‐cap bottom temperature, which influences the heat flow to the cold cap, and thus the rate of melting.