Signal enhancement in laser diode thermal desorption‐triple quadrupole mass spectrometry analysis using microwell surface coatings. (29th January 2019)

• Record Type: Journal Article
• Authors: Dion‐Fortier, Annick; Gravel, Alexia; Guérette, Cassandra; Chevillot, Fanny; Blais, Sonia; Auger, Serge; Picard, Pierre; Segura, Pedro A.
• Is Part Of: Journal of mass spectrometry. Volume 54:Number 2(2019)
• Page Start: 167
• Page End: 177
• Publication Date: 2019-01-29
• Subjects: chelating agents -- high throughput -- hormones -- pesticides -- pharmaceuticals -- scanning electron microscopy -- small organic molecules -- stainless steel -- x‐ray photoelectron spectroscopy; Mass spectrometry -- Periodicals; 543.65
• DOI: 10.1002/jms.4328
• Languages: English
• ISSNs: 1076-5174

Abstract

Abstract: Laser‐diode thermal desorption (LDTD) is an ionization source usually coupled to triple quadrupole mass spectrometry (QqQMS) and specifically designed for laboratories requiring high‐throughput analysis. It has been observed that surface coatings on LDTD microwell plates can improve the sensitivity of the analysis of small polar molecules. The objective of the present study is to understand and quantify the effect of microwell surface coatings on signal intensity of small organic molecules of clinical, environmental, and forensic interest. Experiments showed that the peak areas of diclofenac, chloramphenicol, salicylic acid, and 11‐nor‐9‐carboxy‐Δ 9 ‐tetrahydrocannabinol obtained by LDTD‐QqQMS increased by up to 3 orders of magnitude when using microwells coated with ethylenediaminetetraacetic acid (EDTA). Tests with different chelating agents and polytetrafluoroethylene as microwell surface coatings showed that nitrilotriacetic acid gave significantly higher peak areas for five out of the nine compounds that showed signal enhancement using chelating agents as coatings. Scanning electron microscopy studies of EDTA‐coated and uncoated microwells showed that analytes deposited in the former formed more uniform and thinner films than in the latter. The enhancement effect of surface coatings in LDTD‐QqQMS was explained mainly by the formation of homogenous and thinner layers of nanocrystals of analytes that are easier to desorb thermally than the layers formed when the analytes dry in direct contact with the bare stainless‐steel surface. Chemisorption of some analytes to the stainless‐steel surface of the microwell plate appeared to be a minor factor. Surface coatings widen the number of compounds analyzable by LDTD‐QqQMS and can also improve sensitivity and limits of detection.