The role of Ca2+ ions in the formation of high optical quality Cr4+, Ca:YAG ceramics. Issue 11 (September 2019)

• Record Type: Journal Article
• Authors: Chaika, M.A.; Dluzewski, P.; Morawiec, K.; Szczepanska, A.; Jablonska, K.; Mancardi, G.; Tomala, R.; Hreniak, D.; Strek, W.; Safronova, N.A.; Doroshenko, A.G.; Parkhomenko, S.V.; Vovk, O.M.
• Is Part Of: Journal of the European Ceramic Society. Volume 39:Issue 11(2019)
• Page Start: 3344
• Page End: 3352
• Publication Date: 2019-09
• Subjects: A. Vacuum sintering -- B. Segregations of Ca2+ ions -- C. HRTEM -- D. Cr4+, Ca:YAG; Ceramic materials -- Periodicals; Composite materials -- Periodicals; Matériaux céramiques -- Périodiques; Composites -- Périodiques; Ceramic materials; Composite materials; Periodicals; Electronic journals; 666.05
• DOI: 10.1016/j.jeurceramsoc.2019.04.037
• Languages: English
• ISSNs: 0955-2219

Abstract

Abstract: The distribution of Ca 2+ ions in high optical quality Cr 4+, Ca:YAG ceramics after vacuum sintering followed by air annealing was successfully investigated by HRTEM, STEM, EDX, XPS and optical absorption spectroscopy. The HRTEM microscopy reveals the formation of clear grain boundaries without any impurity phase. A highly-doped thin Ca-rich layer was detected at the grain boundary with Ca 2+ concentration up to 4.9% RTM, while the concentration of Ca 2+ ions in the grain volume is less than 0.25%. The layer suppressed grain growth allowing the production of high optical quality ceramics with the average grain size of 1.95 ± 0.27 μm, which is five times smaller than in calcium-free ceramics. The air annealing of Cr 4+, Ca:YAG ceramics results in a 10-fold decrease in Ca 2+ ion concentration at the grain boundaries, practically removing the Ca-rich layer, moreover, the procedure generates Cr 4+ ions within the grains. Most of the calcium originated from the Ca-rich layer diffuses outside the ceramics or dissolves into Al2 O3 impurities without interfering with the generation of Cr 4+ .