Numerical investigation of non-Newtonian water-CMC/CuO nanofluid flow in an offset strip-fin microchannel heat sink: Thermal performance and thermodynamic considerations. (5th June 2019)

• Record Type: Journal Article
• Authors: Al-Rashed, Abdullah A.A.A.; Shahsavar, Amin; Entezari, Sajad; Moghimi, M.A.; Adio, S.A.; Nguyen, Truong Khang
• Is Part Of: Applied thermal engineering. Volume 155(2019)
• Page Start: 247
• Page End: 258
• Publication Date: 2019-06-05
• Subjects: Non-Newtonian Nanofluid -- Microchannel heat sink -- Entropy generation -- Electronics cooling -- Thermal performance -- Numerical simulation; Heat engineering -- Periodicals; Heating -- Equipment and supplies -- Periodicals; Periodicals; 621.40205
• DOI: 10.1016/j.applthermaleng.2019.04.009
• Languages: English
• ISSNs: 1359-4311

Abstract

Highlights: A hybrid nanofluid containing coated CNT/Fe3 O4 nanoparticles is considered. Forced convection of nanofluid in a microchannel heat sink is examined. Flow field configuration includes symmetric bifurcation flow distributors. Investigations are performed based on both first and second laws of thermodynamics. A promising view for use of this hybrid ferrofluid in mini heat exchangers is found. Abstract: This paper aims to investigate the hydrothermal and entropy generation characteristics of a non-Newtonian nanofluid containing CuO nanoparticles in an offset strip-fin microchannel heat sink (MCHS). The base fluid is solution of 0.5 wt% Carboxymethyl Cellulose (CMC) in water. This study investigates the effects of nanoparticles concentration, Reynolds number and geometric size of strip-fin on the performance of MCHS from the viewpoint of both the first and the second thermodynamic law. The results reveal that enhancing the Reynolds number improves the performance of MCHS by boosting the convective heat transfer coefficient of the working fluid which favourably reduces the CPU surface temperature and thermal entropy generation rate and importantly leads to the temperature uniformity of the CPU surface. However, increase in Reynolds number adversely affects both the pumping power and the frictional entropy generation in the system. Therefore, the optimal strip-fin size is investigated to find the optimum performance of the offset strip-fins MCHS from the viewpoint of both the first and the second thermodynamic law. The optimal results show that the highest ratio of heat transfer enhancement to pressure drop increment, using the nanofluid instead of base fluid, is 2.29. In addition in the optimal case, the minimum total entropy generation rate of the nanofluid is 2.7% less than the base fluid.