Assessment of replication fidelity of optical microstructures by hot embossing. Issue 1 (January 2017)

• Record Type: Journal Article
• Authors: Cirino, Giuseppe; Granado, Renê; Mohammed-Brahim, Tayeb; Jasinevicius, Renato
• Is Part Of: International journal of advanced manufacturing technology. Volume 88:Issue 1/4(2017)
• Page Start: 303
• Page End: 316
• Publication Date: 2017-01
• Subjects: Diamond turning -- Hot embossing -- Diffractive optics -- Wavefront sensor -- PMMA replication fidelity -- Aspheric Fresnel lens; Manufacturing processes -- Periodicals; Production engineering -- Periodicals; 670.427
• DOI: 10.1007/s00170-016-8757-3
• Languages: English
• ISSNs: 0268-3768

Abstract

Abstract This work reports the performance evaluation of low-cost hot embossing processes of fine three-dimensional microstructures, namely (i) cylindrical microlens array, (ii) plano-convex aspheric Fresnel lens, and (iii) pyramidal array structures. All those optical elements were replicated by employing a low-cost hot embossing tool in optical quality acrylic material. Scanning electron microscopy and optical interference microscopy techniques were used to quantitatively measure the obtained structures. In terms of the replication fidelity with respect to the mold counterpart, the resulting optical elements presented at least 96 % of dimensional fidelity at micro- and nanometer scale, including the structures with sharp edges present in the Fresnel lens. In terms of the surface optical quality, resulting root mean square surface roughness of at least one tenth of wavelength was obtained, considering applications in the visible range of spectrum. The results showed that even nanostructures generated by the material removal mechanisms during mold fabrication, such as crystal grain elastic recovery, were well replicated with differences in the range of few of nanometers which is within the vertical resolution of the employed optical interference technique.