Multi-objective optimization of injection molding process parameters for short cycle time and warpage reduction using conformal cooling channel. Issue 5 (February 2017)

• Record Type: Journal Article
• Authors: Kitayama, Satoshi; Miyakawa, Hiroyasu; Takano, Masahiro; Aiba, Shuji
• Is Part Of: International journal of advanced manufacturing technology. Volume 88:Issue 5/8(2017)
• Page Start: 1735
• Page End: 1744
• Publication Date: 2017-02
• Subjects: Plastic injection molding -- Conformal cooling channel -- Additive manufacturing -- Multi-objective optimization -- Sequential approximate optimization; Manufacturing processes -- Periodicals; Production engineering -- Periodicals; 670.427
• DOI: 10.1007/s00170-016-8904-x
• Languages: English
• ISSNs: 0268-3768

Abstract

Abstract In this paper, cooling performance of conformal cooling channel in plastic injection molding (PIM) is numerically and experimentally examined. To examine the cooling performance, cycle time and warpage are considered. Melt temperature, injection time, packing pressure, packing time, cooling time, and cooling temperature are taken as the design variables. A multi-objective optimization of the process parameters is then performed. First, the process parameters of conformal cooling channel are optimized. Numerical simulation in the PIM is so intensive that a sequential approximate optimization using a radial basis function network is used to identify a pareto-frontier. It is found from the numerical result that the cooling performance of conformal cooling channel is much improved, compared to the conventional cooling channel. Based on the numerical result, the conformal cooling channel is developed by using additive manufacturing technology. The experiment is then carried out to examine the validity of the conformal cooling channel. Through numerical and experimental result, it is confirmed that the conformal cooling channel is effective to the short cycle time and the warpage reduction.