Experimental and numerical investigation of the hot incremental forming of Ti-6Al-4V sheet using electrical current. Issue 9 (April 2016)

• Record Type: Journal Article
• Authors: Honarpisheh, M.; Abdolhoseini, M.; Amini, S.
• Is Part Of: International journal of advanced manufacturing technology. Volume 83:Issue 9/12(2016)
• Page Start: 2027
• Page End: 2037
• Publication Date: 2016-04
• Subjects: Hot incremental forming -- Ti-6Al-4V -- Forming force -- Thickness distribution -- FE simulation; Manufacturing processes -- Periodicals; Production engineering -- Periodicals; 670.427
• DOI: 10.1007/s00170-015-7717-7
• Languages: English
• ISSNs: 0268-3768

Abstract

Abstract In this study, the electric hot incremental forming (EHIF) process was experimentally and numerically investigated on the Ti-6Al-4V sheet. The effect of process parameters, such as wall angle, step size, and tool diameter, was investigated on the formability, incremental forming force, and thickness distribution of samples. The results demonstrated that the incremental forming force increases with increasing the step size and decreasing the tool diameter. Also, the thickness of formed samples decreases with increasing the wall angle and decreasing the step size. In addition, the finite element modeling was used to compare the experimental and numerical results. The numerical prediction of forming force and thickness distribution was obtained and compared with experimental results and showed a good agreement.