Probing the spatial coherence of wide X‐ray beams with Fresnel mirrors at BL25SU of SPring‐8. (23rd April 2019)

• Record Type: Journal Article
• Authors: Takeo, Yoko; Motoyama, Hiroto; Senba, Yasunori; Kishimoto, Hikaru; Ohashi, Haruhiko; Mimura, Hidekazu
• Is Part Of: Journal of synchrotron radiation. Volume 26:Part 3(2019)
• Page Start: 756
• Page End: 761
• Publication Date: 2019-04-23
• Subjects: spatial coherence -- Fresnel mirrors -- soft X‐rays; Synchrotron radiation -- Periodicals; Free electron lasers -- Periodicals; 539.73505
• DOI: 10.1107/S1600577519002583
• Languages: English
• ISSNs: 0909-0495

Abstract

Abstract : A Fresnel‐mirror‐based optical system was constructed to determine the degree of spatial coherence at the soft X‐ray beamline of SPring‐8. The spatial coherence properties in the horizontal and vertical directions were measured with a transverse range of larger than 1 mm. Abstract : Probing the spatial coherence of X‐rays has become increasingly important when designing advanced optical systems for beamlines at synchrotron radiation sources and free‐electron lasers. Double‐slit experiments at various slit widths are a typical method of quantitatively measuring the spatial coherence over a wide wavelength range including the X‐ray region. However, this method cannot be used for the analysis of spatial coherence when the two evaluation points are separated by a large distance of the order of millimetres owing to the extremely narrow spacing between the interference fringes. A Fresnel‐mirror‐based optical system can produce interference patterns by crossing two beams from two small mirrors separated in the transverse direction to the X‐ray beam. The fringe spacing can be controlled via the incidence angles on the mirrors. In this study, a Fresnel‐mirror‐based optical system was constructed at the soft X‐ray beamline (BL25SU) of SPring‐8. The relationship between the coherence and size of the virtual source was quantitatively measured at 300 eV in both the vertical and horizontal directions using the beam. The results obtained indicate that this is a valuable method for the optimization of optical systems along beamlines.