3D printed Sm-doped ceria composite electrolyte membrane for low temperature solid oxide fuel cells. (21st May 2019)

• Record Type: Journal Article
• Authors: Feng, Zuying; Liu, Liang; Li, Lingyao; Chen, Jiahe; Liu, Yuhong; Li, Yan; Hao, Liang; Wu, Yan
• Is Part Of: International journal of hydrogen energy. Volume 44:Number 26(2019)
• Page Start: 13843
• Page End: 13851
• Publication Date: 2019-05-21
• Subjects: 3D printing -- Sm-doped ceria composite electrolyte -- Electrochemical performance -- Low temperature solid oxide fuel cells; Hydrogen as fuel -- Periodicals; Hydrogène (Combustible) -- Périodiques; Hydrogen as fuel; Periodicals; 665.81
• DOI: 10.1016/j.ijhydene.2019.03.254
• Languages: English
• ISSNs: 0360-3199

Abstract

Abstract: Three dimensional (3D) printing has attracted much more interest from the research community due to its ability to make complex structures with high resolution and simplified fabrication process. Here we constructed composited electrolyte with certain thickness for the application of low temperature of solid oxide fuel cells. The fabrication of a thin and dense Sm-doped ceria composite electrolyte layers with the thickness about 1200 μm utilizing paraffin-based slurry were investigated. To optimize the assembled cells, 1.7 wt. % glassfiber was introduced and an amazing electrochemical performance was observed. The maximum power density can reach 448 mW/cm 2, 20% higher than the one without glassfiber and the open-circuit voltage is approximately 1.0 V at 550 °C. It is of great potential for 3D printing technology to develop low temperature solid fuel cells with designed mini-structures. Highlights: Solid oxide fuel cell device has been successfully fabricated through three dimensional inkjet printing. A thin and dense Sm-doped ceria-Na0.6 CoO2 composite electrolyte layers were investigated. The device has achieved an excellent maximum power density of 448 mW/cm 2 at 550 °C. The addition of glassfibre (wt.%) could greatly enhance the electrochemical performance of the printed cells.