Formation of porous α-alumina from ammonium aluminum carbonate hydroxide whiskers. Issue 4 (March 2019)

• Record Type: Journal Article
• Authors: Ahmad, Jamil; Tariq, Muhammad Ismail; Ahmad, Rizwan; ul-Hassan, Syed Mujtaba; Mehmood, Mazhar; Khan, Abdul Faheem; Waseem, Shabana; Mehboob, Shoaib; Tanvir, Muhammad Tauseef
• Is Part Of: Ceramics international. Volume 45:Issue 4(2019)
• Page Start: 4645
• Page End: 4652
• Publication Date: 2019-03
• Subjects: Alumina -- Porous -- Mesopores -- Whisker -- Mercury intrusion porosimetry; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2018.11.154
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: Ammonium aluminum carbonate hydroxide (AACH) whiskers prepared by hydrothermal technique were employed as precursor material for development of porous alumina. After compaction of AACH whiskers at 8 bars, calcination was performed at 650 °C followed by sintering at different temperatures. The sintered samples were characterized by XRD, FTIR, SEM and mercury intrusion porosimetry. Mechanical strength was determined by compression testing. At sintering temperatures of 1200 °C to 1400 °C, the % age porosity was around 80%. At 1500 °C, the percentage porosity decreased to 71%. The as-prepared AACH consisted of bundles of whiskers with diameters as thick as 0.7 µm, while an individual whisker had a diameter of about 100 nm with an aspect ratio of about 33. A two-phase mixture consisting of θ- and α-alumina was obtained at 1100 °C, while at 1200 °C and above, single phase α-alumina was formed. θ-alumina retained the bundle-like morphology. However, transformation to α-alumina was accompanied by formation of bead-like morphology. These beads were joined together through necks/stems within the whiskers as well as across the parallel-lying whiskers. These necks grew at 1300 °C to form aggregates with smooth surfaces. At 1400 °C, these aggregates started joining with each other by neck formation and at 1500 °C, a three-dimensional network was formed. For sintering temperatures of up to 1400 °C, pores with sizes around 260 nm were very stable. At 1500 °C, significant pore growth took place along with an overall densification. Therefore, number of pores with sizes of around 260 nm decreased and those with sizes around 10 µm, 1 µm and 5 nm increased. The compression strength of samples sintered at 1100 °C to 1300 °C was in the range of 3.4–4.3 MPa. At 1400 °C, the strength increased to 5.2 MPa, while at 1500 °C, it jumped to 10.8 MPa due to the formation of three-dimensional network.