Microstructure and damage evolution of SiCf/PyC/SiC and SiCf/BN/SiC mini-composites: A synchrotron X-ray computed microtomography study. Issue 9 (15th June 2019)

• Record Type: Journal Article
• Authors: Yang, Haitang; Lu, Zilong; Bie, Bixiong; Fu, Zeyu; Yue, Jianling; Huang, Xiaozhong
• Is Part Of: Ceramics international. Volume 45:Issue 9(2019)
• Page Start: 11395
• Page End: 11402
• Publication Date: 2019-06-15
• Subjects: SiCf/PyC/SiC -- SiCf/BN/SiC -- Mini-composites -- Synchrotron X-ray computed microtomography -- Microstructure -- Damage evolution; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2019.03.004
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: SiCf /PyC/SiC and SiCf /BN/SiC mini-composites comprising single tow SiC fibre-reinforced SiC with chemical vapor deposited PyC or BN interface layers are fabricated. The microstructure evolutions of the mini-composite samples as the oxidation temperature increases (oxidation at 1000, 1200, 1400, and 1600 °C in air for 2 h) are observed by scanning electron microscopy, energy dispersive spectrometry, and X-ray diffraction characterization methods. The damage evolution for each component of the as-fabricated SiCf /SiC composites (SiC fibre, PyC/BN interface, SiC matrix, and mesophase) is mapped as a three-dimensional (3D) image and quantified with X-ray computed tomography. The mechanical performance of the composites is investigated via tensile tests. The results reveal that tensile failure occurs after the delamination and fibre pull-out in the SiCf /PyC/SiC composites due to the volatilization of the PyC interface at high temperatures in the air environment. Meanwhile, the gaps between the fibres and matrix lead to rapid oxidation and crack propagation from the SiC matrix to SiC fibre, resulting in the failure of the SiCf /PyC/SiC composites as the oxidation temperature increases to 1600 °C. On the other hand, the oxidation products of B2 O3 molten compounds (reacted from the BN interface) fill up the fracture, cracks, and voids in the SiC matrix, providing excellent strength retention at elevated oxidation temperatures. Moreover, under the protection of B2 O3, the SiCf /BN/SiC mini-composites show a nearly intact microstructure of the SiC fibre, a low void growth rate from the matrix to fibre, and inhibition of new void formation and the SiO2 grain growth from room to high temperatures. This work provides guidance for predicting the service life of SiCf /PyC/SiC and SiCf /BN/SiC composite materials, and is fundamental for establishing multiscale damage models on a local scale.