Dynamic cutting force prediction for micro end milling considering tool vibrations and run-out. (April 2019)

• Record Type: Journal Article
• Authors: Zhang, Xuewei; Yu, Tianbiao; Wang, Wanshan
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 233:Number 7(2019)
• Page Start: 2248
• Page End: 2261
• Publication Date: 2019-04
• Subjects: Micro end milling -- dynamic cutting forces -- tool vibrations -- tool run-out -- process damping effect; Mechanical engineering -- Periodicals; 621.05
• DOI: 10.1177/0954406218781966
• Languages: English
• ISSNs: 0954-4062

Abstract

An accurate prediction of cutting forces in the micro end milling, which is affected by many factors, is the basis for increasing the machining productivity and selecting optimal cutting parameters. This paper develops a dynamic cutting force model in the micro end milling taking into account tool vibrations and run-out. The influence of tool run-out is integrated with the trochoidal trajectory of tooth and the size effect of cutting edge radius into the static undeformed chip thickness. Meanwhile, the real-time tool vibrations are obtained from differential motion equations with the measured modal parameters, in which the process damping effect is superposed as feedback on the undeformed chip thickness. The proposed dynamic cutting force model has been experimentally validated in the micro end milling process of the Al6061 workpiece. The tool run-out parameters and cutting forces coefficients can be identified on the basis of the measured cutting forces. Compared with the traditional model without tool vibrations and run-out, the predicted and measured cutting forces in the micro end milling process show closer agreement when considering tool vibrations and run-out.