A robust optimization model for designing the building cooling source under cooling load uncertainty. (1st May 2019)

• Record Type: Journal Article
• Authors: Niu, Jide; Tian, Zhe; Lu, Yakai; Zhao, Hongfang; Lan, Bo
• Is Part Of: Applied energy. Volume 241(2019)
• Page Start: 390
• Page End: 403
• Publication Date: 2019-05-01
• Subjects: Robust optimal model -- Cooling load uncertainty -- Monte Carlo simulation -- Cooling source design; Power (Mechanics) -- Periodicals; Energy conservation -- Periodicals; Energy conversion -- Periodicals; 621.042
• DOI: 10.1016/j.apenergy.2019.03.062
• Languages: English
• ISSNs: 0306-2619

Abstract

Highlights: A wide range of uncertain parameters is investigated by Monte Carlo simulation. The robust method can be conducted with computational efficiency. The proposed robust method guarantees the global optimization. Effectiveness, efficiency and accuracy of the proposed robust optimization method are demonstrated based on a case study. A comparison between robust and deterministic method is conducted. Abstract: The cooling load is the basis of cooling source design, while the inherent uncertainties of building information, weather condition, and internal load make it impossible to obtain a determinate load. Probability method can represent characteristics of uncertain cooling loads well, but a large number of Monte Carlo (MC) simulations should be carried out. The optimal cooling source design can be formulated as a mixed-integer-linear-programming model (MILP), which can be solved efficiently to obtain the global optimality using a state-of-the-art MILP solver. However, if all the MC simulations are used in the optimization problem, the size of MILP model would lead to computational issues or even be unsolvable. This study, therefore, proposes a robust optimization design model for sizing the cooling source when there is cooling load uncertainty. A method named in this paper cooling load bin is proposed and implemented by converting time series cooling loads obtained by MC simulations to those in the frequency domain. Therefore, the cooling load frequency and mean value in each cooling interval are obtained and used in the optimal design model, which can be solved efficiently by the General Algebraic Modeling System (GAMS). The robust model is applied to the optimal design of a cooling source to minimize the cost. A case study on the cooling source of a hospital in Tianjin is conducted to demonstrate the effectiveness of the proposed robust model. Furthermore, the accuracy of the solution and the computational efficiency used to evaluate the proposed robust model are systematically investigated and compared with the deterministic model.