"MIL-101(Cr)–methanol" as working pair for adsorption heat transformation cycles: Adsorbent shaping, adsorption equilibrium and dynamics. (15th February 2019)

• Record Type: Journal Article
• Authors: Solovyeva, M.V.; Gordeeva, L.G.; Aristov, Yu.I.
• Is Part Of: Energy conversion and management. Volume 182(2019)
• Page Start: 299
• Page End: 306
• Publication Date: 2019-02-15
• Subjects: Adsorption heat transformation -- MIL-101(Cr) -- Methanol -- Adsorption equilibrium -- Adsorption dynamics -- HeCol cycle; Direct energy conversion -- Periodicals; Energy storage -- Periodicals; Energy transfer -- Periodicals; Énergie -- Conversion directe -- Périodiques; Direct energy conversion; Periodicals; 621.3105
• DOI: 10.1016/j.enconman.2018.12.065
• Languages: English
• ISSNs: 0196-8904

Abstract

Highlights: The equilibrium and dynamics of methanol adsorption on MIL-101(Cr) are studied. Methanol adsorption on MIL-101(Cr) grains occurs at "grain size insensitive" mode. "Grain size sensitive" mode is observed for methanol desorption from MIL-101(Cr) Specific useful heat and heating power reach 385 kJ/kg and 0.65–1.95 kW/kg respectively. The MIL-101 – methanol working pair is promising for the heat amplification cycle. Abstract: Adsorption Heat Transformation (AHT) is one of the most promising solutions for reducing the consumption of fossil fuels and effective environmental protection. The working pair "adsorbent – adsorbate" is a key factor affecting the performance of AHT cycle. This paper addresses the investigation of the adsorption of methanol vapor on MIL-101(Cr), which belongs to a family of porous crystalline solids, Metal – Organic Frameworks. MIL-101(Cr) is shaped with polyvinyl alcohol (PVA) as a binder to form grains. The equilibrium of methanol adsorption on the grains of MIL-101(Cr) is studied and the potential of the MIL-101(Cr) – methanol working pair is estimated for various AHT cycles. The dynamics of methanol adsorption is explored under conditions of a new cycle for upgrading temperature of ambient heat. The main findings of this study are: (i) the addition of PVA does not affect methanol adsorption equilibrium; (ii) the amount of methanol exchanged under typical conditions of the cooling and ambient heat amplification cycles varies from 0.27 to 0.31 g/g; (iii) under conditions of the heat amplification cycle the methanol adsorption on the loose grains of 0.8–1.8 mm size, occurs under the "grain size insensitive mode" when the dynamics of adsorption in the adsorbent beds with the same thickness does not depend on the size of MIL grains. For the desorption runs, the poor mass transfer decelerates the process for the grains of 1.6–1.8 mm size; (iv) the specific useful heat and heating power for heat amplification cycle equal 385 kJ/kg and 0.65–1.95 kW/kg, respectively. The high values of specific heat and heating power illustrate an encouraging potential of the "MIL-101(Cr) – methanol" pair for the ambient heat amplification cycle.