Output feedback control of sensorless photovoltaic systems, with maximum power point tracking. (March 2019)

• Record Type: Journal Article
• Authors: Stitou, Mohamed; Fadili, Abderrahim El; Chaoui, Fatima Zahra; Giri, Fouad
• Is Part Of: Control engineering practice. Volume 84(2019)
• Page Start: 1
• Page End: 12
• Publication Date: 2019-03
• Subjects: Photovoltaic -- MPPT -- PV cable -- High gain observer -- Output feedback control -- Backstepping technique; Automatic control -- Periodicals; 629.89
• DOI: 10.1016/j.conengprac.2018.10.020
• Languages: English
• ISSNs: 0967-0661

Abstract

Abstract: This paper presents an output feedback control of sensorless photovoltaic systems with maximum power point tracking (MPPT). The system consists of a Photovoltaic Generator (PVG) which supplies a DC centrifugal pump, via a DC/DC boost converter. This later being connected to the PVG by a long PV cable. Generally, PV systems are established near the control unit of the converter. The MPPT methods and control laws are based on the PVG voltage and current measurements. However, PV arrays must be located in a site that guarantees good solar radiation. In most cases, such a site is at great distance from the control unit. Thus, on the one hand, the PVG voltage and current measurements become difficult and, on the other hand, the PV cable parameters could significantly effect the MPPT control accuracy if only voltage and current measurements in the cable converter side are used. To overcome these issues, a state estimation for PV systems is considered in this paper. A high gain observer is designed on the basis of a PV system model that accounts for PV cable parameters. It provides estimates of PVG output voltage and current using only current and voltage measurements in the converter side of the cable. A backstepping controller is then synthesized with the view of ensuring the MPPT objective. The output feedback control convergence is formally analyzed and its performances are illustrated by simulation.