Shear behaviour of structural silicone adhesively bonded steel-glass orthogonal lap joints. Issue 24 (17th December 2018)

• Record Type: Journal Article
• Authors: Wang, Zhi-Yu; Shi, Yalong; Wu, Yaoyong; Wang, Qingyuan; Luo, Sibin
• Is Part Of: Journal of adhesion science and technology. Volume 32:Issue 24(2018)
• Page Start: 2693
• Page End: 2708
• Publication Date: 2018-12-17
• Subjects: Orthogonal lap joints -- shear behaviour -- adhesive -- steel-glass; Adhesion -- Periodicals; Adhesives -- Periodicals; 668.3
• DOI: 10.1080/01694243.2018.1501862
• Languages: English
• ISSNs: 0169-4243

Abstract

Abstract: This paper outlines an experimental study on the shear behaviour of structural silicone adhesively bonded steel-glass orthogonal lap joints. In the combination of steel plate and glass panel to form a hybrid structural glazing system, bonded joints with structural silicones can provide certain flexibility which relieves stress peaks at critical points of glass panel. The cohesive failure and its related fracture pattern of test joints with varied geometries of adhesives are examined experimentally. It is shown that the presence of two failure modes as discrete voids and macro cracks is closely related to the adhesive thickness. The effects of geometric parameters of adhesives on the joint shear strength are examined. It is demonstrated that the joint shear strengths are increased with increased individual overlap length, reduced adhesive thickness or increased adhesive width while the shear deformation corresponding to maximum shear force is mostly influenced by adhesive thickness. Mechanical contributions for those effects are analyzed accordingly. Finally, an analytical formula allowing for the equilibrium of strain and force on the adhesive and adherend is proposed for the analysis of shear strength. It is demonstrated that calculated normalized shear force ratios predicted by proposed formula agree well with those from experimental results.