Temper embrittlement of 9%Ni low carbon steel. (February 2019)

• Record Type: Journal Article
• Authors: Tavares, S.S.M.; da Cunha, R.P.C.; Barbosa, C.; Andia, J.L.M.
• Is Part Of: Engineering failure analysis. Volume 96(2019)
• Page Start: 538
• Page End: 542
• Publication Date: 2019-02
• Subjects: Temper embrittlement -- Cryogenic steel -- 9%Ni steel; System failures (Engineering) -- Periodicals; Fracture mechanics -- Periodicals; Reliability (Engineering) -- Periodicals; Pannes -- Périodiques; Rupture, Mécanique de la -- Périodiques; Fiabilité -- Périodiques; Fracture mechanics; Reliability (Engineering); System failures (Engineering); Periodicals; Electronic journals; 620.112
• DOI: 10.1016/j.engfailanal.2018.11.011
• Languages: English
• ISSNs: 1350-6307

Abstract

Abstract: This study investigates the correlation between the microstructure and fracture characteristics of a 9% Ni low carbon steel tempered at 400 °C. This material is used in cryogenic services in oil and gas industries. The un-correct tempering temperature selection may cause temper embrittlement (TE), which drastically decreases the cryogenic toughness of the steel. This phenomena was investigated in specimens with fine and coarse previous austenite grains. The fracture surfaces of temper embrittled specimens were characterized by intergranular cracks and quasi-cleavage facets. Fe3 C intergranular particles were found to be the main microstructural evidence and the cause of temper embrittlement in the 9%Ni low carbon investigated, as observed by detailed scanning electron microscopy with elemental microanalysis. Highlights: Temper embrittlement of 9%Ni low carbon steel was investigated. Tempering at 400 °C causes severe decrease of cryogenic toughness. Fracture is characterized by intergranular cracks and quasi-cleavage facets. Intergranular fracture is attributed to Fe3 C precipitation in previous austenite grains.