Electro‐optic conversion circuit incorporating a fiber optic loop for light fidelity up‐down link use. Issue 2 (6th November 2018) - Chaiwong, Khomyuth
Abstract: We propose the use of the electro‐optic circuit to integrate with the short distance fiber optic loop network, which can be used to form the light fidelity (LiFi) network platform within the building. The electro‐optic conversion circuit is formed by a plasmonic circuit. It is a passive device consisting of an embedded plasmonic island within the microring conjugate mirror (MCM), in which the applied input‐output information can be connected to the fiber optic loop. In this design, all sources of the information can be coupled to the plasmonic transducer and connected to the network. The transducer mobility and two different wavelengths of the input sources are demonstrated and all port signals plotted. The free spectral range and the full‐width at half maximum at the center wavelength of 1.30 μm are ~370.0 and ~0.62 nm, respectively. This is equal to the bandwidth of ~77 PetaHz, from which the output intensity power is ranged between 5 and 15 mW (μm) −2 . The linear relationship between the driven mobility and the input power of ~0.75 (cm) 2 . (Vs) −1 W −1 is achieved at the drop port, with the gold layer length is 600 nm.