Correlation of microstructural and mechanical properties of K-doped tungsten fibers used as reinforcement of tungsten matrix for high temperature applications. (February 2019)

• Record Type: Journal Article
• Authors: Terentyev, D.; Van Renterghem, W.; Tanure, L.; Dubinko, A.; Riesch, J.; Lebediev, S.; Khvan, T.; Verbeken, K.; Coenen, J.W.; Zhurkin, E.E.
• Is Part Of: International journal of refractory metals & hard materials. Volume 79(2019)
• Page Start: 204
• Page End: 216
• Publication Date: 2019-02
• Subjects: Tungsten -- Fiber -- Plasticity -- Recrystallization -- Potassium doped -- Annealing -- Composites; Heat resistant alloys -- Periodicals; Refractory materials -- Periodicals; Metallography -- Periodicals; Alliages réfractaires -- Périodiques; Matériaux réfractaires -- Périodiques; Métallographie -- Périodiques; Heat resistant alloys; Metallography; Refractory materials; Periodicals; Electronic journals; 669.73
• DOI: 10.1016/j.ijrmhm.2018.12.007
• Languages: English
• ISSNs: 0263-4368

Abstract

Abstract: Reinforcement of tungsten by tungsten fibers (Wf ) is considered an attractive option to mitigate the intrinsic brittleness of this material and to possibly extend the operational temperature window to ensure safe operation of the plasma facing component. By now, it has been demonstrated that tungsten fiber-reinforced tungsten composites (Wf /W) acquire pseudo ductility even at room temperature, and crack propagation is determined by the interaction of the fibers with the propagating crack. In view of strong temperature oscillations, expected during operation in the fusion plasma, the mechanical properties of tungsten fibers annealed at different temperatures (up to 2300 °C) were assessed, and the role of potassium (K) doping on the modification of the mechanical properties of as-annealed wires was studied. While K-doping was found to delay the brittleness induced by heat exposure at least up to 1600 °C, still a strong reduction of the fiber strength was observed in tests performed at elevated temperatures. In this work, we investigate the reasons for this effect by performing scanning electron microscopy coupled with electron backscatter diffraction measurements. The longitudinal and transversal cross-sections of W fibers were analyzed to deduce the morphology and size distribution of the grains. Consistent with the mechanical data, we found that annealing at 2100 °C resulted in the full recrystallization of the elongated grains, otherwise formed due to the extrusion fabrication process. Even at 1900 °C, the longitudinal cross-section still exhibits elongated grains. The transversal shape of the grains undergoes a change from needle-like fine structure to equiaxed grain shape upon annealing above 1600 °C. Few scans done for 2300 °C annealed wire revealed that the microstructure contains one or several grains with a dimension of 70–150 μm. The obtained results are discussed and analyzed in the frame of mechanistic model connecting microstructure with the mechanical response. Highlights: EBSD maps for K-doped tungsten fibers are obtained after annealing. Potassium doping suppresses massive grain growths at least up to 1900 °C. Secondary recrystallization occurs above 2100 °C.