Real-time enhancement of tracking performances for cable-conduit mechanisms-driven flexible robots. (February 2016)

• Record Type: Journal Article
• Authors: Do, T.N.; Tjahjowidodo, T.; Lau, M.W.S.; Phee, S.J.
• Is Part Of: Robotics and computer-integrated manufacturing. Volume 37(2016)
• Page Start: 197
• Page End: 207
• Publication Date: 2016-02
• Subjects: Master–Slave system -- Cable-conduit mechanism -- Flexible endoscope -- Feedforward control -- Adaptive control.; Robots, Industrial -- Periodicals; Computer integrated manufacturing systems -- Periodicals; Robotics -- Periodicals; Robots industriels -- Périodiques; Productique -- Périodiques; Robotique -- Périodiques; 670.285
• DOI: 10.1016/j.rcim.2015.05.001
• Languages: English
• ISSNs: 0736-5845

Abstract

Abstract: Natural Orifice Transluminal Endoscopic Surgery (NOTES) is a method that allows for performing complex operations via natural orifices without skin incisions. Its main tool is a flexible endoscope. Cable-conduit mechanism (CCM) or tendon-sheath Mechanism (TSM) is often used in NOTES because of its simplicity, safety in design, and easy transmission. Nonlinearities between the cable and the conduit pose challenges in the motion control of the NOTES system. It is very difficult to achieve the precise position of robotic arms when the system is inside a human's body. This paper presents new approaches to model and control a pair of CCMs (TSMs) used in NOTES system. To deal with the change of cable-conduit configurations during its operation, two control schemes are proposed: (i) an updated table with offline backlash hysteresis learning is constructed. In this case, a simple computation of the direct inverse backlash hysteresis model is introduced without using output feedback for compensation; and (ii) an online estimation of the backlash hysteresis profile under the assumption of availability of output feedback. In this case, adaptive control laws are used to deal with the change of the endoscope configuration. The proposed model and compensation control schemes are experimentally validated using a prototype of a single-DOF-Master–Slave system, which consists of a master console, a telesurgical workstation, and a slave manipulator. The results show that the proposed model and the control schemes improve the tracking performances of the system. Highlights: Compensation control schemes for cable-conduit system are developed. Hysteresis model parameters are identified and optimized for feedforward. Compensation with feedforward scheme is used for control purpose. Compensation with nonlinear adaptive scheme is developed for control purpose. The proposed models and control structure are validated satisfactorily.