Synthesis of yttria by aqueous sol-gel route to develop anti-CMAS coatings for the protection of EBPVD thermal barriers. Issue 12 (September 2016)

• Record Type: Journal Article
• Authors: Delon, E.; Ansart, F.; Duluard, S.; Bonino, J.P.; Malié, A.; Joulia, A.; Gomez, P.
• Is Part Of: Ceramics international. Volume 42:Issue 12(2016)
• Page Start: 13704
• Page End: 13714
• Publication Date: 2016-09
• Subjects: Anti-CMAS coating -- Yttria -- Inorganic or colloidal sol-gel -- Alkoxide route -- Morphology control; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2016.05.169
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: Anti-CMAS yttria coatings have been prepared by sol-gel routes. Yttria powders with controlled morphology are prepared via auto-combustion of yttrium precursors in a polymerized matrix. The influence of key parameters of the water-based sols is assessed. Indeed, the pH of the initial sol and the temperature of thermal treatment play a major role in the morphology and grain size of yttria powders. To prevent infiltration of CMAS, yttria powders are proposed to be synthesized at pH=1 of the aqueous sol, with drying of the sol and heating at 900 °C. After optimization of the synthesis and deposition conditions via sol-gel route, yttria-based coatings with high specific surface area are obtained. They promote the interaction with melt CMAS and consequently limit the degradation of the thermal barrier coatings situated underneath. It was proved that anti-CMAS yttria coating is effective against the infiltration of CMAS at 1250 °C for 15 min and even 1 h.