Phase-field simulation of tilted growth of dendritic arrays during directional solidification. (November 2015)
- Record Type:
- Journal Article
- Title:
- Phase-field simulation of tilted growth of dendritic arrays during directional solidification. (November 2015)
- Main Title:
- Phase-field simulation of tilted growth of dendritic arrays during directional solidification
- Authors:
- Xing, H.
Dong, X.L.
Chen, C.L.
Wang, J.Y.
Du, L.F.
Jin, K.X. - Abstract:
- Highlights: The upper limit, resulting from tertiary branching, depends on both the solidification condition and the preferred crystalline orientation. The selection of the steady-state primary spacing is sensitive to the misorientation angle. Further studies show that the selection of the steady-state primary spacing is sensitive to the misorientation angle. Abstract: The tilted growth of dendritic arrays during directional solidification of non-axially oriented crystals has been simulated in two-dimensional system by using a quantitative phase-field model. A convergence study with respect to the diffuse interface width has been carried out, showing that the results are reasonably independent of the diffuse interface width for W 0 / d 0 ⩽ 11.3 . A parametric study is performed to investigate the effects of the primary spacing, the misorientation angle and the pulling velocity on the tip undercooling, the upper limit of primary spacing, and the tilted angle. Results show that the tip undercooling decreases when increasing the primary spacing or decreasing the misorientation angle. It has been found that the upper limit, resulting from tertiary branching, depends on both the solidification condition (the pulling velocity and the thermal gradient) and the preferred crystalline orientation (the misorientation angle) for the tilted growth of dendritic arrays. Previous rotation law, describing the relation between the tilted angle and the Péclet number, is evaluated according toHighlights: The upper limit, resulting from tertiary branching, depends on both the solidification condition and the preferred crystalline orientation. The selection of the steady-state primary spacing is sensitive to the misorientation angle. Further studies show that the selection of the steady-state primary spacing is sensitive to the misorientation angle. Abstract: The tilted growth of dendritic arrays during directional solidification of non-axially oriented crystals has been simulated in two-dimensional system by using a quantitative phase-field model. A convergence study with respect to the diffuse interface width has been carried out, showing that the results are reasonably independent of the diffuse interface width for W 0 / d 0 ⩽ 11.3 . A parametric study is performed to investigate the effects of the primary spacing, the misorientation angle and the pulling velocity on the tip undercooling, the upper limit of primary spacing, and the tilted angle. Results show that the tip undercooling decreases when increasing the primary spacing or decreasing the misorientation angle. It has been found that the upper limit, resulting from tertiary branching, depends on both the solidification condition (the pulling velocity and the thermal gradient) and the preferred crystalline orientation (the misorientation angle) for the tilted growth of dendritic arrays. Previous rotation law, describing the relation between the tilted angle and the Péclet number, is evaluated according to phase-field simulation results. Moreover, the effect of the development of sidebranches on the growth direction selection was discussed. Further studies on the microstructure evolution from the onset of planar instability during directional solidification show that the selection of the steady-state primary spacing is sensitive to the misorientation angle. … (more)
- Is Part Of:
- International journal of heat and mass transfer. Volume 90(2015:Nov.)
- Journal:
- International journal of heat and mass transfer
- Issue:
- Volume 90(2015:Nov.)
- Issue Display:
- Volume 90 (2015)
- Year:
- 2015
- Volume:
- 90
- Issue Sort Value:
- 2015-0090-0000-0000
- Page Start:
- 911
- Page End:
- 921
- Publication Date:
- 2015-11
- Subjects:
- Directional solidification -- Metal alloys -- Titled growth -- Phase-field model
Heat -- Transmission -- Periodicals
Mass transfer -- Periodicals
Chaleur -- Transmission -- Périodiques
Transfert de masse -- Périodiques
Electronic journals
621.4022 - Journal URLs:
- http://www.sciencedirect.com/science/journal/00179310 ↗
http://www.elsevier.com/journals ↗ - DOI:
- 10.1016/j.ijheatmasstransfer.2015.07.029 ↗
- Languages:
- English
- ISSNs:
- 0017-9310
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - 4542.280000
British Library DSC - BLDSS-3PM
British Library HMNTS - ELD Digital store - Ingest File:
- 9160.xml