Quantitative characterization of the interfacial adhesion of Ni thin film on steel substrate: A compression-induced buckling delamination test. (January 2015)

• Record Type: Journal Article
• Authors: Zhu, W.; Zhou, Y.C.; Guo, J.W.; Yang, L.; Lu, C.
• Is Part Of: Journal of the mechanics and physics of solids. Volume 74(2015:Jan.)
• Page Start: 19
• Page End: 37
• Publication Date: 2015-01
• Subjects: Buckling -- Delamination -- Thin film -- Interfacial adhesion -- Finite element method; Mechanics, Applied -- Periodicals; Solids -- Periodicals; Mechanics -- Periodicals; Mécanique appliquée -- Périodiques; Solides -- Périodiques; Mechanics, Applied; Solids; Periodicals; 531.05
• DOI: 10.1016/j.jmps.2014.09.012
• Languages: English
• ISSNs: 0022-5096

Abstract

Abstract: A compression-induced buckling delamination test is employed to quantitatively characterize the interfacial adhesion of Ni thin film on steel substrate. It is shown that buckles initiate from edge flaws and surface morphologies exhibit symmetric, half-penny shapes. Taking the elastoplasticity of film and substrate into account, a three-dimensional finite element model for an edge flaw with the finite size is established to simulate the evolution of energy release rates and phase angles in the process of interfacial buckling-driven delamination. The results show that delamination propagates along both the straight side and curved front. The mode II delamination plays a dominant role in the process with a straight side whilst the curved front experiences almost the pure mode I. Based on the results of finite element analysis, a numerical model is developed to evaluate the interfacial energy release rate, which is in the range of 250–315 J/m 2 with the corresponding phase angle from −41° to −66°. These results are in agreement with the available values determined by other testing methods, which confirms the effectiveness of the numerical model. Highlights: Interfacial adhesion of Ni film on steel substrate is investigated by compression. A 3D elastoplastic finite element model is developed. The evolution of buckling morphologies, ERRs and phase angles are simulated. A numerical model is proposed to evaluate the interfacial ERR and phase angle. Interfacial ERR is in the range of 250–315 J/m 2 with the phase angle from −41° to −66°.