Finite element modeling of the WC–10 wt.% Co thermal stresses: Build-up and phase specific strain response during cyclic loading. (March 2015)

• Record Type: Journal Article
• Authors: Mari, D.; Campitelli, E.N.; Drake, E.F.; Krawitz, A.D.
• Is Part Of: International journal of refractory metals & hard materials. Volume 49(2015:Mar.)
• Page Start: 256
• Page End: 260
• Publication Date: 2015-03
• Subjects: Cemented carbides -- Cobalt -- Sintering -- Residual stresses -- Neutron diffraction -- FEM; Heat resistant alloys -- Periodicals; Refractory materials -- Periodicals; Metallography -- Periodicals; Alliages réfractaires -- Périodiques; Matériaux réfractaires -- Périodiques; Métallographie -- Périodiques; Heat resistant alloys; Metallography; Refractory materials; Periodicals; Electronic journals; 669.73
• DOI: 10.1016/j.ijrmhm.2014.07.008
• Languages: English
• ISSNs: 0263-4368

Abstract

Abstract: Several finite element models of the morphology of WC–10 wt.% Co were employed to reproduce the build-up of thermal residual stresses as well as the phase specific strain during loading–unloading in compression. The different models differ only in their geometry of the interpenetrating skeletons of WC and Co. They all respect the given volume proportion of each phase. Thermoelasticity is considered for the brittle WC, while also plasticity is included to model the Co binder phase. We compare the predictions of our FEM models with phase specific strain measurements performed by in-situ neutron diffraction and discuss the model validation. Highlights: Neutron diffraction is used to measure residual thermal stresses and phase specific strains upon compression FEM models are used to simulate phase specific strains. Validity of models with respect to experimental data is discussed FEM model using a Co cubic inclusion into a WC Cube reproduce the general trends of phase specific strains Tensile yield stress is readily attained above 1000 MPa in the transverse direction in Co and thermal stress is relaxed FEM combined with neutron diffraction is a useful guideline to understand the specific phase mechanical properties in WC-Co